Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 4 of 4

Thread: New arrival.

  1. #1
    Join Date
    Nov 2019
    Location
    Brisbane
    Age
    69
    Posts
    452

    Default New arrival.

    Hello from Bernie.
    Hope I can assist here as well as learn a lot.
    Building a 7 1/4" loco and run tool and cutter grinders.
    Regards
    BC

  2. #2
    Join Date
    Jan 2004
    Location
    Mackay North Qld
    Posts
    6,446

    Default

    Hi steamloco1954,
    Welcome to our Metalwork Forum.
    You will find a bunch of knowledgeable,experienced and helpful fellows here on the forum.There are even a few steamers here,so you will fit right in.

    If you have questions here's a guide on getting the best from your enquiry.
    The key is to ask lots of questions.

    There is a sticky above the general Metal Working page that can be read to give you an idea.

    Sticky: New? Asking a Question - Read This

    https://metalworkforums.com/f65/t198793-question-read

    Feel free to explore our sub forums for all of what we have to offer. Go to the FORUM box in the LH corner,the one with the little white down arrow and click.
    Click again on Forum Home and it will take down the page where all our sub forums and other helpful links are.

    Again welcome to the Forum

    Grahame

  3. #3
    Join Date
    May 2013
    Location
    Rockhampton, QLD
    Age
    68
    Posts
    454

    Default

    Welcome to the forum.

  4. #4
    Join Date
    Aug 2019
    Location
    Revesby - Sydney Australia
    Age
    56
    Posts
    1,183

    Default

    Welcome!


    P.S. Isn't Burnie in Tasmania?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •