Thanks: 0
Needs Pictures: 0
Results 1 to 3 of 3
Thread: Final coat.
-
11th Jun 2022, 07:03 PM #1Banned
- Join Date
- Sep 2021
- Location
- Adelaide
- Age
- 73
- Posts
- 117
Final coat.
Applied the final coats of acrylic lacquer to the tinwork and some ancillaries this afternoon, didn't come out as clear or as good as I hoped, but acceptable I guess. I'll give it a few more days then sand the tank and spray over with 2k clear. Not the done thing, technically, but plenty do it, so we'll see how it goes.
-
11th Jun 2022, 10:50 PM #2
-
12th Jun 2022, 09:29 AM #3Banned
- Join Date
- Sep 2021
- Location
- Adelaide
- Age
- 73
- Posts
- 117
Because it would have cost me $500-$600 for the paint, hardener and thinners. The same amount of acrylic lacquer is around $100. Plus I had enough to do the job anyway.
Similar Threads
-
Soldering Galvanized Steel for Powder Coat
By TwoHillsStudio in forum METALWORK GENERALReplies: 15Last Post: 12th Mar 2022, 03:28 PM -
Coat suggestions
By phaser in forum METALWORK GENERALReplies: 26Last Post: 11th Jun 2018, 07:22 PM -
Clear coat for polished parts
By Bryan in forum METALWORK GENERALReplies: 12Last Post: 10th Feb 2011, 08:57 PM -
HSS - The final edge
By Kody in forum METALWORK GENERALReplies: 3Last Post: 7th Dec 2008, 01:34 PM