Finally I’m back to working with metal.
I started on my most feared section, the roof.
https://youtu.be/ME16NZ1Fhtk
Printable View
Finally I’m back to working with metal.
I started on my most feared section, the roof.
https://youtu.be/ME16NZ1Fhtk
It’s finally off.
https://youtu.be/cB9eDY0pYdk
Cutting a straight line was harder than I thought.
https://youtu.be/nHQWzU8crak
You got it right cutting long lines straight without a guillotine is very hard, what I do with thin sheet is use a straight edge/piece of tube and run a 1mm quickcut disc along to score it then bend it a few times until it snaps, a quick dress with a file or a flap disc and its done :2tsup:
I know I said I’ll stay on track to finish my Kombi, but.......
https://youtu.be/1letsecd2Xs
The wiring on this Karmann has been a great experience for me for when I get to the Kombi.
https://youtu.be/IN7uiGuTn48
Good to see a fellow dak dak owner here. We have a handful here in the yard, Type 3s a bug and a low light. I'm going to link your vids to the Kombi club guys, think you'll get a lot of viewers. 🤙