Thanks Thanks:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 5 of 5
  1. #1
    Join Date
    Apr 2008
    Location
    Southern Riverina
    Posts
    24

    Default Which bolt into cast iron in firebox?!

    Bit of a weird one this, but hoping someone here will know the answer!

    I have a problem with my wood stove. The cast iron baffle plate basically just rests on a couple of tabs at the front and the wetback tank at the back. The problem is if it gets knocked when loading a log, it pops up and slides back over the wetback and drops off its front tabs into the firebox. As you can imagine, much hilarity ensues.

    After much thought, the only practical solution I can come up with is to tap a thread into the plate at the back, and insert a bolt. The bolt can just snug up to the structure above and stop the baffle plate from being pushed up.

    I know that tapping the cast iron plate is doable. What I'm not sure about is how to ensure a long service life from the bolt in the hostile environment of a hardworking redgum-fuelled firebox. Obviously it needs to be removable for future cleaning and servicing.

    I was thinking of using a stainless bolt as in my experience stainless tends to hold up better to intense heat than mild steel. But I don't know whether differential expansion or galvanic action or some other vector will cause trouble over time. Is there a particular type of bolt that is a best choice for this application?

  2. #2
    Join Date
    Jul 2016
    Location
    Melbourne
    Age
    35
    Posts
    1,522

    Default

    Considering tthere is no load you could make a cast iron bolt.

  3. #3
    Join Date
    Jun 2007
    Location
    sydney ( st marys )
    Age
    64
    Posts
    4,887

    Default

    Based on what you are looking to do I am not sure if cast iron would be a good choice for your locating bolt,Stainless might be the better alternative.
    If the locating bolt/ support needs to be removed periodically even a through hole through your damper with a bolt with nut top and bottom may work.

  4. #4
    Join Date
    Apr 2008
    Location
    Southern Riverina
    Posts
    24

    Default

    Thanks guys, I may be totally overthinking this, I just don't want to have to try and drill out a buggered bolt at the back of the firebox the next time I need to replace some bricks. I think I'll go with a stainless bolt and maybe a smear of copper antiseize just for fun.

  5. #5
    Join Date
    Aug 2008
    Location
    Adelaide
    Age
    68
    Posts
    1,373

    Default

    Quote Originally Posted by Dusty Dave View Post
    I think I'll go with a stainless bolt and maybe a smear of copper antiseize just for fun.
    For what it's worth, we use Loctite LB-771, which is nickel based, in the the locomotive smokeboxes as it stands up to high temperatures and corrosive atmospheres much better than the copper or silver grades.

Similar Threads

  1. WTB-Cast Small Cast Iron Lapping Plate
    By Betnorm in forum WANTED TO BUY
    Replies: 4
    Last Post: 19th Nov 2019, 01:01 PM
  2. When does cast iron not machine like cas t iron?
    By simonl in forum METALWORK GENERAL
    Replies: 20
    Last Post: 31st Jul 2018, 08:57 PM
  3. Replies: 8
    Last Post: 19th Jun 2013, 06:32 PM
  4. Cast iron VS Cast steel lathe compound slide
    By Ueee in forum METALWORK GENERAL
    Replies: 10
    Last Post: 23rd Dec 2012, 11:40 PM
  5. Cast Iron
    By RayG in forum METALWORK GENERAL
    Replies: 17
    Last Post: 30th Apr 2011, 02:27 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •