Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Lost Wax vs. Clay Casting
-
19th Jan 2020, 06:45 AM #1
Lost Wax vs. Clay Casting
I am planning on casting an engagement ring that will house one round cut diamond. It will have the pieces sticking out for the stone's setting. If cost is a factor, what is the best method for casting this ring? It is for a friend of mine so I don't want to mess up.
-
19th Jan 2020, 01:15 PM #2Most Valued Member
- Join Date
- May 2011
- Location
- Murray Bridge S Aust.
- Age
- 71
- Posts
- 5,942
Welcome to a TOP FORUM from Down Under.
Sorry, I can't help with your question, but we have a seperate section for Jewelry making, you might be better off asking there.
Have added a link to assist you. https://metalworkforums.com/f310
KrynTo grow old is mandatory, growing up is optional.
-
20th Jan 2020, 10:55 AM #3
Clay casting is similar to casting in sand moulds in the sense that there is a parting line. This would probably not allow you to mould all the features that you need, such as the claws that hold the stone. Investment casting may cost more but also may be the only way to cast what you need.
Cheers, Bob the labrat
Measure once and.... the phone rings!
Similar Threads
-
Melting brass for lost wax casting
By inlay chris in forum THE FOUNDRYReplies: 4Last Post: 17th Jun 2016, 09:06 PM -
Casting about for cast iron casting ideas
By Graziano in forum THE FOUNDRYReplies: 49Last Post: 1st Apr 2012, 12:05 PM -
Casting Tools Part 4 - Sand Casting Tools
By RayG in forum THE FOUNDRYReplies: 8Last Post: 9th Dec 2011, 12:03 PM