Needs Pictures: 0
Results 1 to 2 of 2
Thread: Hammer & Tong Rack
-
11th Oct 2019, 03:06 PM #1
Hammer & Tong Rack
I made myself a Hammer and tong rack. All hand tool work no electricity involved.
Lots of punching, sliding, & drifting.
The base rail started life as a 20x40mm bar. Both ends were upset to 20x80mm to form the shouldered tenon. This took me a day & a half!
The slot in the legs starts parallel with the bar and is turned 90 deg. This was an interesting process.
All operations were done under careful supervision and it was made sure there were no interruptions.
…..Live a Quiet Life & Work with your Hands
-
11th Oct 2019, 10:01 PM #2Senior Member
- Join Date
- Feb 2012
- Location
- Tamworth, NSW
- Posts
- 205
Great skills and I loved the photos. Thanks for sharing.
Similar Threads
-
Tong type electrode holders
By China in forum WELDINGReplies: 6Last Post: 29th Mar 2018, 11:24 PM -
generating gears with a rack cutter - with an existing rack as a template
By StrayAlien in forum METALWORK GENERALReplies: 9Last Post: 20th Apr 2017, 09:01 AM -
Blacksmith Tong Clearance
By Corin in forum THE SMITHYReplies: 4Last Post: 19th Dec 2015, 10:28 PM -
Buying a rack
By welder in forum METALWORK GENERALReplies: 29Last Post: 7th Feb 2014, 11:12 AM -
roof rack
By wooddog in forum WELDINGReplies: 1Last Post: 13th Nov 2010, 06:07 PM