Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 2 of 2
  1. #1
    Join Date
    Aug 2008
    Location
    Melbourne
    Age
    34
    Posts
    1,075

    Default (Almost) complete change gear set, 20DP 14.5PA 20-130T

    As part of the big cleanout at work, these are surplus to requirements.
    Almost complete set of 20DP 14.5 degree PA change gears from 20-130 teeth, 5/8" bore, 3/16" keyway, 16mm wide. The "hub" in the centres of the larger gears is 40-45mm, so could easily be bored out or sleeved to suit whatever you need.

    The following gears are missing from the set, but could be made if required:
    21, 22, 23, 25, 26, 27, 33, 37, 38, 43, 110

    The following are duplicates (some of which could easily be re-cut to fill the gaps):
    24, 28, 31, 36, 44, 48, 60

    107 pcs total.

    These are cast iron (some of the small ones are shop made in steel) and are HEAVY, so pickup only from South Caulfield

    Would prefer to sell as one lot, $2500 ONO (current ebay prices are about $40-100 EACH)

    PXL_20210526_091641465.jpgPXL_20210526_091635106.jpg
    Gear cutting specialists and general engineers www.hardmanbros.com.au
    Fine pitch gear cutting from 0.1 Module www.rigear.com.au

  2. #2
    Join Date
    Aug 2008
    Location
    Melbourne
    Age
    34
    Posts
    1,075

    Default

    1500?
    All offers considered, better someone use them than them take up space and eventually get binned
    Gear cutting specialists and general engineers www.hardmanbros.com.au
    Fine pitch gear cutting from 0.1 Module www.rigear.com.au

Similar Threads

  1. Unknown lathe gear change set
    By Jon.holmes in forum METALWORK GENERAL
    Replies: 5
    Last Post: 2nd May 2021, 11:12 AM
  2. Homemade Quick Change Gearbox Complete
    By TommyGMachining in forum METALWORK PROJECTS
    Replies: 8
    Last Post: 25th Feb 2019, 10:15 PM
  3. Hercus Change Gear Diameter
    By pipeclay in forum THE HERCUS AREA
    Replies: 7
    Last Post: 15th Jun 2009, 01:41 AM
  4. Hercus Change Gear Guard
    By pipeclay in forum THE HERCUS AREA
    Replies: 17
    Last Post: 2nd Sep 2008, 03:36 PM
  5. Hercus Gear Change Plate
    By John Richards in forum METALWORK GENERAL
    Replies: 3
    Last Post: 16th Feb 2007, 01:24 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •