Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 13 of 13
-
16th Jan 2021, 09:40 AM #1human termite
- Join Date
- Jul 2007
- Location
- sandstone point queensland
- Age
- 69
- Posts
- 182
QA-100 - Quick Change Toolpost and 2 extra holders
Description
QA-100 - Quick Change Toolpost
75 - 115mm Lathe Centre Height
Overview
Manufactured from carbonized and hardened steel.
Suitable for 75-110mm centre Height Lathes
vert little use cost me $198, plus $77 each for 2 extra tool holders.6 holders in all
from Machinery house .....bob Sandstone point QLD says 110 centre height but will easily do 125 +centre height used it on my optimum 250 swing, asking 190
-
17th Jan 2021, 11:23 AM #2
-
17th Jan 2021, 11:09 PM #3human termite
- Join Date
- Jul 2007
- Location
- sandstone point queensland
- Age
- 69
- Posts
- 182
-
17th Jan 2021, 11:12 PM #4Member
- Join Date
- Sep 2015
- Location
- Perth
- Posts
- 62
-
17th Jan 2021, 11:17 PM #5human termite
- Join Date
- Jul 2007
- Location
- sandstone point queensland
- Age
- 69
- Posts
- 182
-
17th Jan 2021, 11:22 PM #6human termite
- Join Date
- Jul 2007
- Location
- sandstone point queensland
- Age
- 69
- Posts
- 182
-
17th Jan 2021, 11:33 PM #7Member
- Join Date
- Sep 2015
- Location
- Perth
- Posts
- 62
Not sure. It's $198 new from Hairy Forbes and you can take it back if unsuitable.
I think it will work with 8mm tools, 10mm may be above centre height.
This suggests a 90-115mm height is suitable, which is covered by the qa-100. https://www.pclavo.com/t37-myford-la...m-p-307439.htm
-
24th Jan 2021, 09:26 AM #8
-
6th Feb 2021, 10:04 PM #9human termite
- Join Date
- Jul 2007
- Location
- sandstone point queensland
- Age
- 69
- Posts
- 182
still available .......bob
-
7th Feb 2021, 12:54 PM #10New Member
- Join Date
- Mar 2013
- Location
- Beechworth Vic
- Age
- 73
- Posts
- 6
Myford suitability
I had one of these with an ML7 for years, and it worked well.
Its a copy of the Dickson toolpost. I used 10mm tooling but its an easy mod to take 12mm.
https://www.youtube.com/watch?v=PGvLnlGG4XI
-
10th Feb 2021, 10:06 PM #11human termite
- Join Date
- Jul 2007
- Location
- sandstone point queensland
- Age
- 69
- Posts
- 182
this one actually takes 12mm .....bob
-
11th Feb 2021, 12:04 PM #12Senior Member
- Join Date
- Aug 2012
- Location
- Greenmount, W.A.
- Age
- 70
- Posts
- 272
I'll buy it - if still available, and you would post it to me in Western Australia.
PM in a moment.
Regards,
Alan.
-
11th Feb 2021, 10:12 PM #13human termite
- Join Date
- Jul 2007
- Location
- sandstone point queensland
- Age
- 69
- Posts
- 182
sold to AJ in WA
Similar Threads
-
250-111 quick change toolpost
By robyn2839 in forum WANTED TO BUYReplies: 6Last Post: 10th Oct 2020, 09:40 PM -
Fitting quick change toolpost.
By riverbuilder in forum METALWORK GENERALReplies: 10Last Post: 13th Sep 2020, 01:13 PM -
H&F quick change toolpost
By riverbuilder in forum METALWORK - Machinery, Equipment, MARKETReplies: 0Last Post: 20th Jul 2020, 07:22 PM -
Quick Change Toolpost Which Is Better
By steran50 in forum METALWORK GENERALReplies: 90Last Post: 23rd May 2017, 11:49 AM -
Quick Change Toolpost
By nexusone in forum METALWORK GENERALReplies: 3Last Post: 2nd Jan 2008, 07:52 AM