Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 17
Thread: lathe chucks
-
9th Nov 2020, 11:03 AM #1Senior Member
- Join Date
- Jul 2014
- Location
- melbourne
- Posts
- 110
lathe chucks
hi everyone i have some lathe chucks for sale and a backplate
first chuck is a three jaw, 160mm diameter, made in poland, no key or outer jaws, is bolt on backplate type, $60
next is a as new only used a couple of times 4 jaw 160mm diameter , comes with box booklet key and mounting bolts for backplate type fit $80 (think its chinese )
next is a 8inch english made 4 jaw, marked crown made, is bolt on back plate type $80
and last is a chuck back plate thread size is 2 inch and thread is 8tpi and flange diameter that bolts to chuck backplate is 120mm
pick up blackburn vic 3130
-
9th Nov 2020, 12:55 PM #2Senior Member
- Join Date
- Feb 2012
- Location
- Tamworth, NSW
- Posts
- 202
Any chance you could give some measurements of the hole size in mounting plates please or an idea of the lathe they may have come from as I am very interested?
Thanks
Ian
-
9th Nov 2020, 01:14 PM #3Senior Member
- Join Date
- Jul 2014
- Location
- melbourne
- Posts
- 110
hi Ian
not sure what you mean, do you want the chuck centre bore sizes ? i can measure them for you
the chucks are universal and will fit any lathe as long you buy use the correct mounting back plate that suits your spindle and a lathe that has at least
13inch swing .
then you just have to machine the backplate to fit the chuck and bolt it up.
hope that helps
cheers Damien
-
9th Nov 2020, 01:21 PM #4Senior Member
- Join Date
- Feb 2012
- Location
- Tamworth, NSW
- Posts
- 202
-
9th Nov 2020, 07:30 PM #5Most Valued Member
- Join Date
- May 2011
- Location
- Murray Bridge S Aust.
- Age
- 71
- Posts
- 5,942
Hi Damien, would you be prepared to post the 3 jaw chuck PLEASE.
If you could, I'll take it PLUS postage of course.
Thanks
KrynTo grow old is mandatory, growing up is optional.
-
9th Nov 2020, 08:01 PM #6Senior Member
- Join Date
- May 2012
- Location
- Vermont 3133 Victoria
- Posts
- 248
Hi Damien,
I'll take the British made 8" if its still available, I can pick up Friday or Monday morning if that suits, I am in Vermont.
Cheers Bruce.
-
10th Nov 2020, 01:16 PM #7Senior Member
- Join Date
- Jul 2014
- Location
- melbourne
- Posts
- 110
chuck
hi ian the three jaw 6 inch is pending sale and 4 jaw 8 inch british made is sold .
the 160mm 4 jaw chuck bore size is 45mm and were back plate needs to fit be machined to size is around 64.70mm .
this is the only chuck left if you want it please let me know thanks damien
-
10th Nov 2020, 01:52 PM #8Senior Member
- Join Date
- Feb 2012
- Location
- Tamworth, NSW
- Posts
- 202
-
13th Nov 2020, 09:57 AM #9Senior Member
- Join Date
- Jul 2014
- Location
- melbourne
- Posts
- 110
-
15th Nov 2020, 05:00 PM #10
Do you have a price on that backplate in the last photo, if it’s still available ?
Brad.
Every Day might not be a good Day,
but there is something good in every Day.
-
16th Nov 2020, 10:44 AM #11Senior Member
- Join Date
- Jul 2014
- Location
- melbourne
- Posts
- 110
-
17th Nov 2020, 10:58 AM #12
-
17th Nov 2020, 10:28 PM #13Senior Member
- Join Date
- Jul 2014
- Location
- melbourne
- Posts
- 110
-
18th Nov 2020, 11:34 AM #14
-
18th Nov 2020, 12:56 PM #15Senior Member
- Join Date
- Jul 2014
- Location
- melbourne
- Posts
- 110
Similar Threads
-
NOS Bison Lathe Chucks
By rickw72 in forum EBAY, GUMTREE, and other off forum sales sitesReplies: 0Last Post: 17th Aug 2019, 02:03 PM -
Lathe Chucks
By eskimo in forum METALWORK GENERALReplies: 4Last Post: 2nd Oct 2018, 11:39 PM -
Slim Lathe chucks
By Ueee in forum METALWORK GENERALReplies: 5Last Post: 19th May 2014, 09:55 AM -
Ozmestore Lathe chucks
By Ueee in forum METALWORK GENERALReplies: 44Last Post: 26th Apr 2013, 03:05 PM -
Lathe Chucks - Appropriate Size
By Anorak Bob in forum METALWORK GENERALReplies: 13Last Post: 15th May 2011, 09:04 PM