Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 6 of 6
  1. #1
    Join Date
    May 2011
    Location
    Murray Bridge S Aust.
    Age
    71
    Posts
    5,942

    Default 220mm Cold saw blade

    Cold saw blade approx 220mm diameter, selling for $0 plus postage.
    May need some attention/sharpening as has surface rust on one side.
    Kryn
    To grow old is mandatory, growing up is optional.

  2. #2
    Join Date
    Dec 2007
    Location
    Sydney
    Posts
    395

    Default

    Kryn,
    What’s the dia of the centre hole ?
    Would you be willing to post it, at my expense ?
    Thanks
    H.
    Jimcracks for the rich and/or wealthy. (aka GKB '88)

  3. #3
    Join Date
    May 2011
    Location
    Murray Bridge S Aust.
    Age
    71
    Posts
    5,942

    Default

    Pretty sure that it fits the Brobo machines as it looks the same size. Can confirm hole diameters and PCD of the holes tomorrow for you.
    Of course I can post it, which is why I put "selling for $0 plus postage".
    Kryn
    To grow old is mandatory, growing up is optional.

  4. #4
    Join Date
    May 2011
    Location
    Murray Bridge S Aust.
    Age
    71
    Posts
    5,942

    Default

    The main centre hole is 40mm as near as I can measure it, the larger holes, 11mm dia (4 of) 63mm centres diagonally and the 2 smaller holes 8mm dia 56mm centres.
    Just remeasured it and it's 225 diameter and has 120 teeth.
    HTH
    Kryn
    To grow old is mandatory, growing up is optional.

  5. #5
    Join Date
    Dec 2007
    Location
    Sydney
    Posts
    395

    Default

    That’s will fit mine no probs.
    Its an ancient Brobo, single speed with a Viva petrol pump for the coolant.
    Im at 2137 here.
    If you PM me bank details I will shoot you off some $.
    Thanks Kryn
    H
    Jimcracks for the rich and/or wealthy. (aka GKB '88)

  6. #6
    Join Date
    May 2011
    Location
    Murray Bridge S Aust.
    Age
    71
    Posts
    5,942

    Default

    PM sent.
    Kryn
    To grow old is mandatory, growing up is optional.

Similar Threads

  1. Cold-cut saw blade adapter flange
    By nigelpearson in forum METALWORK PROJECTS
    Replies: 3
    Last Post: 21st Nov 2019, 04:13 PM
  2. Cold cut saw blade - different tooth profiles?
    By Moph in forum METALWORK GENERAL
    Replies: 10
    Last Post: 1st Jun 2019, 09:39 PM
  3. Which Cold Cut Saw?
    By FenceFurniture in forum METALWORK GENERAL
    Replies: 29
    Last Post: 21st Apr 2019, 09:19 PM
  4. Cold Saw Options: Triton, Cold Saw, Power Hacksaw
    By Jarh73 in forum METALWORK GENERAL
    Replies: 41
    Last Post: 2nd May 2012, 09:15 PM
  5. putting a cold saw blade into a timber mitre saw?
    By gros21 in forum METALWORK GENERAL
    Replies: 8
    Last Post: 21st Jun 2011, 11:09 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •