Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
Thread: Refrig manifold and gauges
-
13th Apr 2020, 11:33 AM #1Most Valued Member
- Join Date
- Jul 2006
- Location
- Athelstone, SA 5076
- Posts
- 4,255
Refrig manifold and gauges
Refrigeration manifold and working gauges.
2st pic lh side 30inch vac to 250psi or -100 to 17ATTAC1700kprhgauge 0 to 800psig (0-5500kpa)
Gauges are 1/8mbsp
20200413_095111.jpg
2nd pic
Lh 30inch vac - 240psig (-100 to 1600kpa)
Rh 0 to 500psig (0-3900kpa)
Same thread size as above.20200413_095120.jpg
$20.00 each
-
24th Apr 2020, 09:30 PM #2Most Valued Member
- Join Date
- Jul 2006
- Location
- Athelstone, SA 5076
- Posts
- 4,255
No one even wants them for the gauges only?
-
25th Apr 2020, 10:08 PM #3future machinist
- Join Date
- Mar 2008
- Location
- nowra
- Posts
- 1,598
Would you post. The mechanical who serviced my ute drove off with my ute unlocked and My imperial R22 gauges ended up on the street.
BETTER TO HAVE TOOLS YOU DON'T NEED THAN TO NEED TOOLS YOU DON'T HAVE
Andre
-
26th Apr 2020, 07:08 PM #4Most Valued Member
- Join Date
- Jul 2006
- Location
- Athelstone, SA 5076
- Posts
- 4,255
Certainly can Andre...your expense of course.
-
13th May 2020, 09:19 PM #5Most Valued Member
- Join Date
- Jul 2006
- Location
- Athelstone, SA 5076
- Posts
- 4,255
These have been scrapped
-
14th May 2020, 12:30 PM #6Senior Member
- Join Date
- Oct 2015
- Location
- melbourne
- Posts
- 473
I thought they were gone already..
-
14th May 2020, 12:52 PM #7Senior Member
- Join Date
- Oct 2015
- Location
- melbourne
- Posts
- 473
I thought they were gone already..
-
14th May 2020, 08:46 PM #8Most Valued Member
- Join Date
- Jul 2006
- Location
- Athelstone, SA 5076
- Posts
- 4,255
Andre never replied.. but i am slack and havent scrapped as yet...
-
14th May 2020, 10:25 PM #9Most Valued Member
- Join Date
- May 2011
- Location
- Murray Bridge S Aust.
- Age
- 71
- Posts
- 5,942
If Russ doesn't take them, I'll have them too, PLEASE.
KrynTo grow old is mandatory, growing up is optional.
-
14th May 2020, 11:50 PM #10Senior Member
- Join Date
- Oct 2015
- Location
- melbourne
- Posts
- 473
I'll take them.
I'll pm you.
-
2nd Jun 2020, 11:12 PM #11Senior Member
- Join Date
- Oct 2015
- Location
- melbourne
- Posts
- 473
arrived
packed extraordinarily well....thanks Eskimo
Similar Threads
-
Rebuilt rusted out gas manifold on my grill with 304L stainless steel
By Weekend.Warrior in forum METALWORK GENERALReplies: 0Last Post: 8th Jul 2019, 10:09 AM -
BSP Cap Screw Gauges x 2 (Go/No go gauges - Snap Gauges) FREE
By John T K in forum METALWORK - Machinery, Equipment, MARKETReplies: 0Last Post: 1st Oct 2017, 01:20 PM -
Hole MIG welded up in tractor exhaust manifold.
By aametalmaster in forum METALWORK GENERALReplies: 1Last Post: 3rd Apr 2013, 05:53 PM -
MIG welding a cast iron exhaust manifold.
By aametalmaster in forum WELDINGReplies: 4Last Post: 19th Feb 2012, 11:50 PM -
Turbo Manifold Build
By Spencer* in forum METALWORK GENERALReplies: 16Last Post: 17th Aug 2011, 03:21 PM