Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 2 of 2
  1. #1
    Join Date
    Oct 2011
    Location
    Norwood-ish, Adelaide
    Age
    59
    Posts
    6,541

    Default Adjustable hand reamers

    For a long time I've wanted some small adjustable reamers. I finally got some the other day, but as part of the lot there were a whole bunch I already have (and I had some duplicates anyway)
    Below in the blurry photo shows the latest acquisition. I'm looking to move all of these on if I can. They are Sutton (M designator), with some smaller ones being Taylor and Jones (H designator). As my existing reamers are also Sutton, I could use them as spares but there may be others out there who would like a reamer or two.
    IMG_0571.jpg
    Post is possible at your cost. I will move a bit on price if you want multiples. If you want nearly all of them I'll throw in the yellow box. To give someone who may want most/all of them a chance, I'll hold off on selling individuals until the end of this weekend.

    All of the larger ones are engraved (neatly) with the previous company's name. I have not tried but that will probably come off with some sanding as it is not very deep if that worries you. I've called them used if I can see metal particles in the threads of the reamer bodies, and new if I can't. With the exception of one of the Cs with some surface rust, they are all in good condition (the duplicate A, B and C look more battered but are still good). I think it was one of those cases where purchasing a set was attractive 'just in case' but reality was that most did not get used or if so only sparingly

    Qty Size Condition Price
    1 Tee Handle Used 30
    1 HW 9/32” - 5/16”(7-8mm) Used 30
    1 HY 11/32” - 3/8”(8.75-9.5mm) New 30
    1 HZ 5/16” - 11/32”(8.00-8.75mm) New 30
    1 MA7 7 - 8mm. Used 35
    1 MA4 9.5 - 10.25mm. Used 35
    1 MA3 10.25 - 11mm. Used 35
    1 MA2 11 - 12mm. New 35
    2 MA 12 - 13.5mm. Used (1 only just) 35
    2 MB 13.5 - 15mm. 1 new, one nearly 40
    2 MC 15 - 16.75mm. Used, 1 with surface rust 30
    1 MD 16.75 - 18.25mm. New 45
    1 ME 18.25 - 19.75mm. New 50
    1 MG 21.5 - 23.75mm. New 50

    As far as I can tell, the case is for a Sutton M3 set (MA4 to MH). Most of the reamers are there; you would only need to find a MF and MH to be complete.

    Michael

  2. #2
    Join Date
    May 2011
    Location
    Murray Bridge S Aust.
    Age
    71
    Posts
    5,942

    Default

    That's very tempting Michael. Could you PM me a price for the lot, please.
    Thanks,
    Kryn
    To grow old is mandatory, growing up is optional.

Similar Threads

  1. Reamers
    By DSEL74 in forum METALWORK GENERAL
    Replies: 3
    Last Post: 15th Mar 2018, 10:36 PM
  2. Hand Scraping a Hand Plane to .0001" Accuracy
    By Ulma Doctor in forum METALWORK GENERAL
    Replies: 4
    Last Post: 28th Feb 2015, 06:38 PM
  3. Hand taper pin reamers, spiral flute v straight flute
    By bob ward in forum METALWORK GENERAL
    Replies: 11
    Last Post: 22nd Jul 2014, 09:30 PM
  4. Adjustable Reamers
    By jack620 in forum METALWORK GENERAL
    Replies: 15
    Last Post: 9th Oct 2012, 08:35 PM
  5. tin snips-left hand or right hand?
    By 3 toed sloth in forum METALWORK GENERAL
    Replies: 39
    Last Post: 18th Mar 2012, 04:07 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •