Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Hercus 5" chuck jaws
-
18th Nov 2021, 06:57 PM #1future machinist
- Join Date
- Mar 2008
- Location
- nowra
- Posts
- 1,598
Hercus 5" chuck jaws
It's a long shot but would anyone have any jaws to suit a 5" burnard chuck. With a intergrated 260 backplate. I purchased one with only one set of jaws. Which I stole as they turned out to fit a 5" set tru chuck I have that was missing jaws. I would also sell the hercus chuck sans jaws if anyone is interested.
BETTER TO HAVE TOOLS YOU DON'T NEED THAN TO NEED TOOLS YOU DON'T HAVE
Andre
-
18th Nov 2021, 07:53 PM #2Senior Member
- Join Date
- Aug 2015
- Location
- Adelaide
- Posts
- 239
I will have a look for you for the jaws, I may have a spare set but I can't promise anything but I might be interested in the chuck if you were wanting to sell it?
-
21st Nov 2021, 08:47 AM #3Novice
- Join Date
- May 2012
- Location
- Hobart
- Posts
- 18
Do you want the internal or external set? I have several external sets I have slowly been selling
-
21st Nov 2021, 07:55 PM #4
Hi Guys,
Cromwell here in the UK do various sizes of chuck jaws ! Not cheap but very good quality. I got a set of 100 mm PB ones a while ago.
https://www.cromwell.co.uk/search?pa...ery=Chuck+JawsBest Regards:
Baron J.
Similar Threads
-
Hercus 9" Backing plate for 5" 4 jaw chuck.
By lamestllama in forum WANTED TO BUYReplies: 1Last Post: 14th Sep 2020, 02:45 PM -
ROHM 8" outside chuck jaws
By Alf Scotting in forum WANTED TO BUYReplies: 2Last Post: 30th Mar 2017, 07:25 PM -
Wanted: outside Jaws, Vanco 6" 3 jaw chuck.
By Gammaboy in forum WANTED TO BUYReplies: 0Last Post: 12th May 2016, 10:37 AM -
Wanted 3 Jaw Chuck for Hercus 9"
By oggy in forum THE HERCUS AREAReplies: 13Last Post: 30th Mar 2016, 12:34 PM -
Wanted jaws for Burnerd 4" 3 jaw chuck.
By Com_VC in forum THE HERCUS AREAReplies: 21Last Post: 31st Mar 2011, 11:51 AM