Results 1 to 7 of 7
  1. #1
    Join Date
    Mar 2017
    Location
    Melbourne
    Age
    64
    Posts
    221

    Default Flat bed Hercus circa 1937

    We are all used to the Southbend styled Hercus machines, and the later 260's. All the design cues that quickly identify the machines as a Hercus, with the early examples dating back to 1940. But Hercus were making machines before these classics, and they were quite different in design. I have seen debates on this forum and FB groups about identifying early machines "is this a Hercus, it sort of looks like one, but doesn't have any makers marks on it". Well, I finally saw an early Hercus in the flesh. It is on display at the National Steam Centre, Scoresby, Melbourne. You will see from the photos that it more resembles the early Myfords than our familiar post 1940 9inch machines. It has a flat bed and is smaller, sold in 1937. I thought you might be interested in this piece of Aussie industrial manufacturing history - so ably restored and displayed by the MSTEC (Melbourne Steam Traction Engine Club). If you get a chance to visit their facilities in Scoresby, you will find a heap of interesting stuff on display. Cheers, Tony

    Hercus 1937 a.jpg

    Hercus 1937 b.jpg

    Hercus 1937 c.jpg

    Hercus 1937 d.jpg

  2. #2
    Join Date
    Sep 2012
    Location
    York, North Yorkshire UK
    Posts
    6,439

    Default

    Hi Tony, Guys,

    Thanks for the pictures !

    It reminds me of the Drummond flat bed lathe. It has features that are missing on more modern lathes.
    Best Regards:
    Baron J.

  3. #3
    Join Date
    Sep 2006
    Location
    Wandong
    Age
    60
    Posts
    31

    Default

    Thanks for the heads up on that!
    My lathe is almost the same with only a few cosmetic changes (also originally purchased from McPhersons many moons ago)
    Looks like I'll need to take a trip down there sometime in the future and check it out... It'll be a big help when it comes to sorting out the gears.
    Thanks for the post

  4. #4
    Join Date
    Aug 2012
    Location
    Greenmount, W.A.
    Age
    70
    Posts
    272

    Default

    On this Forum, I am sure I have seen a post of a Hercus flatbed lathe - like a Portass, with Hercus decals on it.

    Also, when Mr Fred Hercus arrived in Australia afer World War I he started by making bar bed lathes (I have been led to believe). They were copies of the South Bend bar bed lathes. I am sure I saw an article by Ray Gurney on the Sydney Traditional Tool Group's website many years ago when I was a member.

    I can't find either - probably because I am not much good at searching!

  5. #5
    Join Date
    Mar 2017
    Location
    Melbourne
    Age
    64
    Posts
    221

    Default

    Some photos from the source - the Hercus history book. Note dates 1926 to 1938.

    Sent from my SM-N976B using Tapatalk

  6. #6
    Join Date
    Dec 2005
    Location
    South Australia
    Posts
    1,656

    Default

    My Grandfather had two of them, he and Fred Hercus were good friends.

  7. #7
    Join Date
    Jul 2011
    Location
    Adelaide
    Posts
    837

    Default

    Quote Originally Posted by A J in WA View Post
    On this Forum, I am sure I have seen a post of a Hercus flatbed lathe - like a Portass, with Hercus decals on it.

    Also, when Mr Fred Hercus arrived in Australia afer World War I he started by making bar bed lathes (I have been led to believe). They were copies of the South Bend bar bed lathes. I am sure I saw an article by Ray Gurney on the Sydney Traditional Tool Group's website many years ago when I was a member.

    I can't find either - probably because I am not much good at searching!
    I posted this a while back. https://metalworkforums.com/f189/t20...e-hercus-lathe It was a deceased estate of someone who had something to do with Hercus. There were a fair few unmachined castings for various Hercus machines. Also an early Hercus milling machine which seemed to owe a lot to a #3 Tool and Cutter grinder. I got most of a vice for a #1 Tool and cutter grinder.

Similar Threads

  1. Dating an old Hercus 9" flat belt lathe
    By Quaamaboy in forum THE HERCUS AREA
    Replies: 4
    Last Post: 13th Aug 2018, 07:20 PM
  2. Hercus 9" Flat belt
    By Fargo in forum EBAY, GUMTREE, and other off forum sales sites
    Replies: 0
    Last Post: 7th Aug 2016, 01:45 PM
  3. possible early flat bed Hercus in Canberra
    By allterrain50 in forum THE HERCUS AREA
    Replies: 11
    Last Post: 2nd May 2016, 12:21 PM
  4. Width of flats on flat belt Hercus pulleys
    By nearnexus in forum THE HERCUS AREA
    Replies: 5
    Last Post: 2nd Apr 2013, 07:50 PM
  5. Flat belt 9" Hercus Lathe
    By omshree in forum THE HERCUS AREA
    Replies: 4
    Last Post: 17th May 2012, 11:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •