Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 3 of 3
  1. #1
    Join Date
    Dec 2007
    Location
    Sydney
    Posts
    395

    Default Welding table etc any interest. Sydney

    I’ve had a rather disturbing visit from our local council compliance commissar.
    As my non conforming permitted use is ‘woodworking’ I may be selling off a couple of items wot aren’t woodworking and aren’t strictly needed.

    About 10 years ago I brought home from the structures’ lab an old rig.

    It’s a 12mm steel plate 3.2 m x 1.2m welded to two longitudinal 200mm x 100mm x 5mm sections the full length.
    This sits on a couple of cast iron machine base sections giving a deck height of 770mm.
    Theres a few tapped holes in the top but it’s pretty clean and rust free.
    I used it with 5 50 x 50 fabricated frames to cut and repair a car chassis.

    The other is a 45” x 55” cast iron printers stone.
    Sits on original wooden base, all the drawers of type traded for lifting onto my ute 25 years ago.
    Ive used this as a marking off table. (Patternmaking).
    There might be about a 1mm sag across it, I can check when it’s decluttered with my 1m straight edge and feelers.
    Probably a large angle plate with it.

    This is just a heads up to see if there is any interest out there.
    Can post pics or Inspection ok if there is.
    H.
    Jimcracks for the rich and/or wealthy. (aka GKB '88)

  2. #2
    Join Date
    Dec 2007
    Location
    Sydney
    Posts
    395

    Default

    The big steel plate might be spoken for.
    H.
    Jimcracks for the rich and/or wealthy. (aka GKB '88)

  3. #3
    Join Date
    Sep 2021
    Location
    Western Sydney
    Posts
    262

    Default

    If the steel top becomes available let me know. I'm currently bidding on a similar sized one via GOL but not hopeful i'll win it. Cheers

    *Just got outbid @ $350 , lol (3100x1000x16)

Similar Threads

  1. FixturePoint Welding Table 900 x 600mm Table
    By dradyz in forum METALWORK - Machinery, Equipment, MARKET
    Replies: 2
    Last Post: 26th May 2016, 01:38 PM
  2. Replies: 14
    Last Post: 12th Oct 2015, 12:57 PM
  3. Replies: 10
    Last Post: 24th May 2014, 07:30 PM
  4. Once off small welding Job - Sydney
    By Daren73 in forum METALWORK GENERAL
    Replies: 1
    Last Post: 29th Jun 2012, 07:37 PM
  5. Once off small welding job - any Sydney takers
    By Clinton1 in forum METALWORK GENERAL
    Replies: 1
    Last Post: 16th Apr 2010, 06:26 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •