Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 3 of 3
  1. #1
    Join Date
    Jul 2020
    Location
    landsborough
    Age
    41
    Posts
    1

    Default Trans Mig 195 Approx Value Please

    Hi Members im new to Welding and have started buying fixing and selling ,
    I have now a Trans Mig 195 and am wondering if someone can assist with an approximate value ? Approx 5 years old and seems to work fine apart from needing a new liner which i will replace asap . Any thoughts on value appreciated . Thanks In Advance .

  2. #2
    Join Date
    Nov 2019
    Location
    Brisbane
    Age
    69
    Posts
    452

    Default Transmig 195

    Quote Originally Posted by aaron_sproule@h View Post
    Hi Members im new to Welding and have started buying fixing and selling ,
    I have now a Trans Mig 195 and am wondering if someone can assist with an approximate value ? Approx 5 years old and seems to work fine apart from needing a new liner which i will replace asap . Any thoughts on value appreciated . Thanks In Advance .
    Hello from BC.
    A Transmig 195 would be over 20 years old by now. From memory came in 2 models. 1 with a Tweco 1 torch hard wired and a Rural pack with a Tweco 2 torch. If it doesn't have a lot of guts it might have blown output capacitors which was common if 0.9mm wire was used. Resale value is a bit sad as the inverter migs run rings around the old machines. $400 on Ebay.
    Regards
    BC

  3. #3
    Join Date
    Aug 2006
    Location
    Melbourne
    Posts
    1,105

    Default

    If you think it is approx 5 years old are you sure it is not a Transmig 190?


    Quote Originally Posted by steamloco1954 View Post
    Hello from BC.
    A Transmig 195 would be over 20 years old by now. From memory came in 2 models. 1 with a Tweco 1 torch hard wired and a Rural pack with a Tweco 2 torch. If it doesn't have a lot of guts it might have blown output capacitors which was common if 0.9mm wire was used. Resale value is a bit sad as the inverter migs run rings around the old machines. $400 on Ebay.
    Regards
    BC
    Also some of them you could only run gas not gasless wire.

    I think they may have came out in the late 80's so quite old now but well made.

Similar Threads

  1. Drummond 'geared flywheel' lathe approx 1912
    By WCD in forum EBAY, GUMTREE, and other off forum sales sites
    Replies: 1
    Last Post: 25th May 2020, 01:04 PM
  2. Small Piece of Brass Approx 100x25x3mm
    By joez in forum METALWORK - Machinery, Equipment, MARKET
    Replies: 9
    Last Post: 30th Jul 2010, 11:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •