Thanks Thanks:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 3 of 3
  1. #1
    Join Date
    Sep 2016
    Location
    mandurah wa
    Age
    71
    Posts
    8

    Default My New AC DC Tig Arrived

    After much consideration and searching from, the good the bad and the ugly of AC tigs, I bought the Token Tools Elite 215A combo with plasma cutter.

    Took just 7 days from order to arrival here in SW WA.

    Packed extremely well and very impressed with the total package, I also bough some ally rods , tungsten's and a small torch.

    Not fired up in anger as I need some argon first (have argon mix from my mig) so need to swop out at the big green shed, but it all lights up and seems fairly easy to understand the menus.

    More to follow.

    Oh and it's bloody heavy ! so I'm assuming a good sign of a quality unit.

    Another satisfied TT customer.

  2. #2
    Join Date
    Sep 2016
    Location
    mandurah wa
    Age
    71
    Posts
    8

    Default TT AC DC Tig First use

    Better late than never, finally got my new welder up and running to build some aluminium frames for the beds in my camper conversion I'm doing.

    Using 32x32x3 shs I welded up the corners and cross supports fine, welder performs a treat, did seem to have the amperage higher than the recommended 30A/mm, I jacked it up to 150A and using the footpedal it puddles quick and is so smooth.

    Only downside is me, I'm rusty as hell and keep dipping the tungsten, ha lots of grinding but I'll get there.

  3. #3
    Join Date
    Jan 2004
    Location
    Mackay North Qld
    Posts
    5,128

    Default

    I glad to hear all is running well.

    Just a gentle reminder that the tig radiation is the most severe of all so don't forget to cover up. In summer it is so easy to disregard in the quest for comfort.

    A short few minutes of tig exposure can cause the harm that could be expected in hours with a stick welder.

    Cheers
    Grahame

Similar Threads

  1. My new welder has arrived!
    By atregent in forum WELDING
    Replies: 14
    Last Post: 4th Sep 2011, 07:13 PM
  2. My Invicta 4M arrived
    By Stustoys in forum METALWORK GENERAL
    Replies: 136
    Last Post: 30th May 2011, 12:01 PM
  3. Drives Direct VFD arrived
    By neksmerj in forum METALWORK GENERAL
    Replies: 22
    Last Post: 17th Feb 2011, 11:57 AM
  4. ER40 collets just arrived
    By 19brendan81 in forum METALWORK GENERAL
    Replies: 4
    Last Post: 8th Jun 2010, 12:23 PM
  5. The Zyto has arrived
    By jmk89 in forum METALWORK GENERAL
    Replies: 15
    Last Post: 2nd Feb 2010, 06:51 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •