PDA

View Full Version : No. 0 Mill Serial Number and Mill at Work Photos



Anorak Bob
29th Dec 2008, 09:44 PM
Hello Everyone,

My daughter has informed me that I will most probably get a smack for digressing from the subject of Derek's USER NAME thread with my photos and tale about using the mill and not painting the house during these holidays. It's just that I worked out how to resize photos thanks to Gene and Derek and that, for me, was an acheivement that I just had to share.

Thankyou for your understanding,
Regards Bob.

bitza500
30th Dec 2008, 03:31 AM
Hi Bob, I Have 4 children but the 2 youngest 12 and 15 drive me nuts as soon as you start getting you hands dirty in come one DAD, can you take me here
or DAD, MUM said you have to do this
or the who must be obeyed stop playing with that think and do some work ???
So I am slowly building a real Bitza to check the straightness of 4WD axles as my mate replace the bearings on Nissan Patrol's and it is a pig of a job and he will not do a rebuild unless the axle is under .005" out which means EVERY AXLE has to be checked and straightened
You will have to send us some pics when you get you new toyand as for putting pictures in I was feeling a real idiot as I think I tried 6-7 different systems to Finally get on the screen
so let us have a preview as is so we can see the difference from yuck to yum
all the best Derek