View Full Version : quote for CNC job required.
Dean. Hannah
14th Apr 2021, 02:23 PM
Hi everyone.
I need someone to make this part out of aluminium block.
Size is H=35mmxW=56xH=162.
This part is to mount my stepper motor onto the bottom rail of my clock. If your are interested I will send you the stl of the job.
391541391542
here is an older video of my clock that i have been working on for 10 years. https://youtu.be/t1PnWaE9og8
let me know if you are interested!
cheers
Dean.
BaronJ
14th Apr 2021, 06:17 PM
Hi Dean,
Welcome to the forums !
If you have access to a 3D printer it should be an easy part to make !
Michael G
14th Apr 2021, 07:04 PM
I haven't got CNC, but that part looks like it could be made on a manual mill without too many dramas; I'd be willing to give it a go.
(some accommodation for the interior square corners would be needed whether manual or CNC)
Michael
old1955
15th Apr 2021, 01:39 PM
Welcome to the forum Dean.
Ross
1964deano
1st May 2021, 12:05 PM
I haven't got CNC, but that part looks like it could be made on a manual mill without too many dramas; I'd be willing to give it a go.
(some accommodation for the interior square corners would be needed whether manual or CNC)
Michael
Ok. What sort of price are we talking about?
Dean.
Michael G
2nd May 2021, 04:12 PM
As others will tell you, I normally work on the basis of material plus what it is worth to you for labour.
Without pricing the material, I would guess a lump of Al for that would be around $30 to $40 and probably take a couple of hours to machine.
You'd also be up for $8 to $9 postage to get it to you.
Michael
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.