PDA

View Full Version : Lost Wax vs. Clay Casting



RoadRock
19th Jan 2020, 06:45 AM
I am planning on casting an engagement ring that will house one round cut diamond. It will have the pieces sticking out for the stone's setting. If cost is a factor, what is the best method for casting this ring? It is for a friend of mine so I don't want to mess up.

KBs PensNmore
19th Jan 2020, 01:15 PM
Welcome to a TOP FORUM from Down Under.
Sorry, I can't help with your question, but we have a seperate section for Jewelry making, you might be better off asking there.
Have added a link to assist you. https://metalworkforums.com/f310
Kryn

labr@
20th Jan 2020, 10:55 AM
Clay casting is similar to casting in sand moulds in the sense that there is a parting line. This would probably not allow you to mould all the features that you need, such as the claws that hold the stone. Investment casting may cost more but also may be the only way to cast what you need.