View Full Version : Milling Machine Wanted
colnjulia
4th Feb 2019, 01:34 AM
Unfortunately sold my Mill in a moment of weakness, miss it dearly and want to replace it and all the sundry items.
anyone got one for sale or knows someone who might be persuaded, let me know what might be available.
Kind regards
Col
KBs PensNmore
4th Feb 2019, 10:47 PM
Hi Col,
What sort of machine are you after, Universal, Horizontal, Deckel? What is your prefered tooling, (Morse, BT40, etc) and what sort of price range are you prepared to go to? Asking as someone else will need to know, no point in telling you about a machine with Morse if you're looking for something else.
Kryn
colnjulia
6th Feb 2019, 09:49 AM
Kryn, thanks for your reply, my previous mill was a universal with an R8 taper, looking for something similar but the taper is not a deal breaker as the tooling went with the mill, looking to spend up to three large. Depends on the machine though.
Col
colnjulia
28th Feb 2019, 01:47 PM
OK have sourced a mill, now I need some tooling of the R8 kind. Let me know what you have that you would be prepared to part with.
Kind regards
Col
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.