PDA

View Full Version : DOL Starter with 240v coil.



lamestllama
30th Nov 2018, 11:36 PM
Hi,

I am looking for a DOL Starter with a 240v coil. Prefer something a little more modern that 1965 (date of current device). The current device is unreliable at starting and staying started.

Regards Eric

China
1st Dec 2018, 01:16 AM
Probably needs a clean a service or here https://www.sparkydirect.com.au/c/4240922/dol-starters.html

Michael G
1st Dec 2018, 07:01 AM
I did not think anyone bothered with DOL unless the motor was big. Contactors are available on ebay for not much if you are just after something that will do no volt release.

Michael

lamestllama
1st Dec 2018, 09:14 AM
Probably needs a clean a service or here https://www.sparkydirect.com.au/c/4240922/dol-starters.html

It is beyond a clean it has bits of perished rubber falling out of it. Thanks for the link.

lamestllama
2nd Dec 2018, 10:38 AM
I did not think anyone bothered with DOL unless the motor was big. Contactors are available on ebay for not much if you are just after something that will do no volt release.

Michael

I want the possibility of adding a foot switch too which really means I want a contactor in the box.

Eric

eskimo
3rd Dec 2018, 09:59 AM
Eric, you didnt look around my shed hard enough when you visited

what do you really want or need..I have plenty of contactors 240v and 24v coils (and trannies to go with them) if needed. 2nd hand you can have for zilch...might even have a DOL station??? but a contactor in an enclosure does the same ...all you need to add are stop start switches
How many auxilaries?..do you need overload protection?.????
0411703609...might be going fishing so let me know

eskimo
18th Dec 2018, 04:04 PM
Yours if you still need it Eric. Looks likes its missing the 'go' switch which should still be available377343hi

lamestllama
22nd Dec 2018, 11:14 PM
Eskimo

That is perfect I will take it.

Eric