PDA

View Full Version : Parallel Flange Channel



Michael G
22nd Nov 2018, 07:49 PM
I should really get around to making up a stand I've been promising myself for several years now. To do that I need around 4.5m of PFC, either in the 75x40 size or the 100x50 size. Before I raid the local steel place, has a member in Adelaide got any surplus? It will cut up into lengths 650mm long or less, so short lengths are quite alright.

Michael

KBs PensNmore
22nd Nov 2018, 09:56 PM
Does it have tp be PFC, can you get away with tapered flange?
Kryn

Michael G
22nd Nov 2018, 10:22 PM
I need the height (say 80 to 100mm) as it is just to lift something up that much. I didn't see TFC in that size when I checked some catalogues.

Michael

KBs PensNmore
23rd Nov 2018, 10:45 PM
Hi Michael, if you can email me the sizes you need I'll have a look and see what I can find for you. From memory it's 100 X 50.
Will it matter if it has joins in it as there are a few shorter bits in the bin???
Kryn

Michael G
24th Nov 2018, 07:27 AM
Thanks Kryn. Shorter pieces don't worry me - I have the technology to join them. I'll send an email.

Michael