Com_VC
25th Mar 2018, 06:58 PM
Hi all,
I have one of these types of switches that I would like to use to control forward and reverse on a single phase motor but not 100% sure on how it should be wired up so thought i'd ask here first. The motor I have is a single phase capacitor start motor and it has 4 wires inside the terminal box, I was able to manually switch the wires around to confirm that forward and reverse is working.
This is the type of switch it is. More info here, https://www.ebay.com.au/itm/VEFN-Tyre-Tire-Changer-Forward-Reverse-Switch-20-AMP/122710403259?hash=item1c921c28bb:g:CkkAAOSw9fRZvowy
It is numbered 1,2,3,4,5,6,7,8,9,10,11,12
372597
I have one of these types of switches that I would like to use to control forward and reverse on a single phase motor but not 100% sure on how it should be wired up so thought i'd ask here first. The motor I have is a single phase capacitor start motor and it has 4 wires inside the terminal box, I was able to manually switch the wires around to confirm that forward and reverse is working.
This is the type of switch it is. More info here, https://www.ebay.com.au/itm/VEFN-Tyre-Tire-Changer-Forward-Reverse-Switch-20-AMP/122710403259?hash=item1c921c28bb:g:CkkAAOSw9fRZvowy
It is numbered 1,2,3,4,5,6,7,8,9,10,11,12
372597