View Full Version : heavy load
morrisman
20th Oct 2017, 09:28 PM
This I think is a Cincinnati Milling machine sitting in a blitz truck during WW2 in Australia. You would think the mill would be more suited to factory production, seems a waste to see it in such a precarious setup in the truck. I believe its a machinery body truck, I see two vises and a small lathe. They would have had a generator trailer towed . The poor blitz would struggle with that lot.
370733
franco
21st Oct 2017, 02:41 PM
Thanks for the WW2 mobile workshop photo. The mill certainly seems big in proportion to the other machine tools.
Here's a WW1 version for comparison - no mill, but a bigger lathe, which appears to be set up for either treadle or power operation, and a good sized drill press and grinder. The narrow solid tyres on the truck must have made it easy to bog the vehicle in muddy or sandy conditions. I wonder if the generator was separate, or driven from the truck engine?
https://www.awm.gov.au/collection/B02069/
Frank
morrisman
21st Oct 2017, 07:24 PM
Trucks or lorries were widely used in WW1 . A guy down at Paynesville in East Gippsland has a WW1 Albion truck restored.
Here is a example of the dedication these restorers go to: These guys fabricate all sorts of parts , with much turning and fitting involved.
WW1 Thornycroft restoration - Pre WW2 vehicles - HMVF - Historic Military Vehicles Forum (http://hmvf.co.uk/topic/9672-ww1-thornycroft-restoration/)
Vann
24th Oct 2017, 02:51 PM
...but a bigger lathe, which appears to be set up for either treadle or power operation, and a good sized drill press and grinder...I can't speak for the other equipment, but the blacksmiths post drill (centre of photo) looks to be hand powered only (although flat belt "loose & fast" pulleys were an option for most models).
Thanks for posting.
Cheers, Vann.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.