View Full Version : Now that's a CNC gantry mill....
jhovel
27th Sep 2017, 12:36 AM
Now that's a real CNC gantry mill :) (in Paul Hogan's voice)
https://www.youtube.com/watch?v=uq3_FZ_HPDc&t=384
BaronJ
22nd Oct 2017, 10:52 PM
Hi Joe,
That tin of white paint didn't like been squashed :D
phaser
7th Nov 2018, 09:43 AM
Holy cow that's just ridiculous.
BobL
7th Nov 2018, 10:47 AM
Every time I click on the Youtube link I get shown a different video ?????
First one was of pulling a 270m long plastic pipe though a hole in the ground
Second was was of some joinery
Next one was of a large boat
Next one was of a 320 ton piece of gear being lifted????
No CNC anything
Com_VC
7th Nov 2018, 11:41 AM
Hi Bob,
Try this link it should work better, for some reason the link originally posted goes straight to the end of the video and then another starts.
https://www.youtube.com/watch?v=uq3_FZ_HPDc
elanjacobs
8th Nov 2018, 07:55 PM
for some reason the link originally posted goes straight to the end of the video and then another starts.
The original link has "t=384" at the end, meaning that the video will start playing from 384 seconds in. When you select "share link" on youtube, make sure you don't have the "Start at" box ticked.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.