PDA

View Full Version : A basic, but capable, Dividing Head



metaler
3rd Oct 2016, 06:43 AM
I feel justified in highlighting this video for my basic dividing head on the forum as my website stats and correspondence received, shows it, surprisingly, to be third in popularity after my two grinding rests. It can achieve 58 divisions between 2 and 99 plus many useful ones over 99 including 100, 125 and 360.

A link to the video can be found on this page (http://www.homews.co.uk/page132.html) on my website.

Harold Hall

caskwarrior
3rd Oct 2016, 10:47 AM
Thanks Harold, this is on my to-build list after i make a scaled up version of your QCTP, its great that you post these here thanks very much!

Ralph

morrisman
3rd Oct 2016, 05:28 PM
I built one of your basic DH as a project Harold

It functions very well. I made a cast iron gear with it .

Mike http://metalworkforums.com/f65/t187345-gear?highlight=premo

clive hugh
19th Oct 2016, 11:31 AM
Where is the link?

KBs PensNmore
19th Oct 2016, 06:12 PM
A link to the video can be found on this page (http://www.homews.co.uk/page132.html) on my website. Harold Hall

Clive, click on "this page" on the first posting from Harold, Took me a while to find it also!!!!!

metaler
20th Oct 2016, 07:48 PM
Not suprised Clive you could not find the link as it dosn't show up at all well. I have noticed this on other posts I have made on this forum, am I not adding them by the best method. If not, perhaps someone can point me in the right direction.

Harold Hall