NedsHead
17th Aug 2016, 09:52 PM
G'day fellas
I've begun a rifling machine build, minimal skill so nothing too fancy, I'm putting it together from easily available parts sourced from Ebay and locally.
The sine bar will be fully adjustable allowing any twist rate per inch to be cut.
My next job is to make the adjustment mounts for the sine bar, followed by an indexable barrel vice at the other end and finally the hard part (making the cutter box and cutter) that I'll braze to the end of a long rod.
I may have to increase the diameter of the rails if it lacks rigidity, or just switch them out for fully supported linear rails, time will tell.
I hope to one day chamber and rifle my own black powder barrel.
Most of the parts were purchased from this Ebay seller items - Get great deals on items on eBay Stores! (http://stores.ebay.com.au/CNC-AND-CUPCAKE-WORLD/CNC-SHOP-/_i.html?_fsub=410890119&_sid=657086089&_trksid=p4634.c0.m322)
Here is a short YouTube video https://www.youtube.com/watch?v=orAi33HjWB8 (one handed phone footage) sorry about that:)
Thanks for looking and any suggestions are welcome.
Ben
363920
363921363922363923
I've begun a rifling machine build, minimal skill so nothing too fancy, I'm putting it together from easily available parts sourced from Ebay and locally.
The sine bar will be fully adjustable allowing any twist rate per inch to be cut.
My next job is to make the adjustment mounts for the sine bar, followed by an indexable barrel vice at the other end and finally the hard part (making the cutter box and cutter) that I'll braze to the end of a long rod.
I may have to increase the diameter of the rails if it lacks rigidity, or just switch them out for fully supported linear rails, time will tell.
I hope to one day chamber and rifle my own black powder barrel.
Most of the parts were purchased from this Ebay seller items - Get great deals on items on eBay Stores! (http://stores.ebay.com.au/CNC-AND-CUPCAKE-WORLD/CNC-SHOP-/_i.html?_fsub=410890119&_sid=657086089&_trksid=p4634.c0.m322)
Here is a short YouTube video https://www.youtube.com/watch?v=orAi33HjWB8 (one handed phone footage) sorry about that:)
Thanks for looking and any suggestions are welcome.
Ben
363920
363921363922363923