View Full Version : Line Shaft Workshop
Vann
16th May 2016, 08:40 AM
There are a few pieces of machinery listed over here, from an old engineering workshop in Hawera, that are surplus as "...part of a major engineering workshop modernisation project."
According to the seller, they're currently running off a 5hp motor via the lineshaft.
Firstly a bandsaw.
Hmmm... having problems uploading photos
(loaded exact same photo on woodworkforums.com without problems). What's going on? Software hitch?
Cheers, Vann.
YBAF
16th May 2016, 02:14 PM
Do you have a link to the listing ?
Vann
17th May 2016, 02:06 AM
Do you have a link to the listing ?Each machine has it's own listing. I've copied all the photos - I'll wait until the problem's fixed and post them then.
Cheers, Vann.
Vann
20th May 2016, 09:00 AM
There are a few pieces of machinery listed over here, from an old engineering workshop in Hawera, that are surplus as "...part of a major engineering workshop modernisation project."
According to the seller, they're currently running off a 5hp motor via the lineshaft.
Firstly a bandsaw.
Nope, still not working.
Cheers, Vann.
Vann
25th May 2016, 09:58 PM
There are a few pieces of machinery listed over here, from an old engineering workshop in Hawera, that are surplus as "...part of a major engineering workshop modernisation project."
According to the seller, they're currently running off a 5hp motor via the lineshaft.
Firstly, for DSEL, a Denbigh drill press
362516 362517 Yaah it's working.
Another old drill press (no long connected to the lineshaft)
362522 362523
A guillotine.
362521 362520 362519
A grinder.
362518
And finally, for the best view of the lineshaft, a bandsaw.
362515
Cheers, Vann.
kwijibo99
26th May 2016, 12:16 PM
Thanks for posting the photos Vann, the punch and shear machine looks interesting and you've got to love the belt guards.
Cheers,
Greg.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.