View Full Version : needed to bash a pin into revolver frame
eskimo
25th Apr 2016, 05:52 PM
So I made this for my gunsmithing tools chest...a small lead hammer
362176
Had the knurled alloy bit from a broken extendable inspection mirror...some scrap brass and some contaminated scrap lead projectiles.
Michael G
25th Apr 2016, 09:03 PM
I tend to forget how many tools in a fitter's box used to be self made. Thanks for the reminder.
Michael
BaronJ
25th Apr 2016, 09:42 PM
Hi Eskimo,
That is a pretty little knocking stick :) I really like the handle...
Making one is something that I've been meaning to do for quite some time. I even acquired a small lump of lead from an old wooden lead lined toilet cistern to make one.
tanii51
12th Jun 2016, 10:26 AM
i made a couple of lead hammers after seeing one with an old milling machine that i bought a most usefull tool.. had to make 2 because the first one was too heavy for me to lift with dodgy arms and wrists and not nearly as neat and pretty as yours
john
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.