Mike4
5th Dec 2015, 05:36 PM
Does anyone know of a good supplier of Metabo Angle Grinder parts?
I have several WE 14-125 with quick release nuts , not cheap junk ones which are starting to require some maintenance , eg stator and armature, fan , fan shroud,bearings.
The usual stuff after a few years of shop use.The one that needs the most parts was returned from an "authorised repairer" , and lasted a week , the main problem was that the two screws which hold the armature in position were not put back in .
Not interested in claiming "warranty " if that's his workmanship.
Michael
I have several WE 14-125 with quick release nuts , not cheap junk ones which are starting to require some maintenance , eg stator and armature, fan , fan shroud,bearings.
The usual stuff after a few years of shop use.The one that needs the most parts was returned from an "authorised repairer" , and lasted a week , the main problem was that the two screws which hold the armature in position were not put back in .
Not interested in claiming "warranty " if that's his workmanship.
Michael