12 Volt Portable Hydraulic Pump.

[SurfinNev]

Have a PE10 Series PR102 12 Volt Portable Hydraulic Pump for sale.

This pump has never been used and in as new condition.

Selling now for well below replacement cost.

$750.00 plus postage.

Pickup available from Kallangur on northside of Brisbane.

Item # PR102, Electric/Battery Pump Hydraulic PE10 Series Upto 25 Ton Quarter Horse on Metro Hydraulic (http://equipment.metrohydraulic.com/item/mps-spx-power-team-electric-gasoline-battery-pumps/mp-hydraulic-pe10-series-upto-25-ton-quarter-horse/pr102?)

http://www.excel.com.au/verve/_resources/03._Electric-Battery_Pumps.pdf

http://i8.photobucket.com/albums/a24/NiftyNev/HydPump2.jpg
http://i8.photobucket.com/albums/a24/NiftyNev/HydPump5.jpg
http://i8.photobucket.com/albums/a24/NiftyNev/HydPump3.jpg
http://i8.photobucket.com/albums/a24/NiftyNev/HydPump4.jpg







Nev

[SurfinNev]

Reduced to $650.00 plus postage.

Nev

[SurfinNev]

Reduced to $550.00 including postage.

Nev

[SurfinNev]

Thought I would give the pump the once over so I was sure everything was ok with it. I suspected something was loose inside the case. When I opened it up I found that the strap that holds the pump motor to the case was a bit loose and the rubber cushioning between motor and case was floating around inside. This has now been fixed with a new strap made from a strip of thick aluminium flat shaped to fit the motor and mounting points in the case. The original was very thin perforated steel strip and I suspect, stretched a bit over time. Also replaced the rubber cushioning between case and motor with a piece of thick rubber hose, split and fitted to the curve of the case where the motor is clamped in. I have also added threaded inserts to the base and fitted rubber feet to it. These can be removed if needed allowing the pump to be mounted in a fixed location. There was also a little piece or two broken away from where the oil filler flange locates inside the case so I installed two small screws through the case to lock this in place and to stop it rotating when the filler plug is removed or refitted.

Nev

[SurfinNev]

My batteries in my 4WD just died on me so I am now a bit desperate and willing to let this go for the price of replacing the batteries. $400.00 plus transport cost. That should be around $50 if I send it through Smart Send. So $450.00 is now the price. Anyone want a bargain?

Nev

[SurfinNev]

Advertised elsewhere. Please close.

Nev.