PDA

View Full Version : SOLD: Flynn 4 Inch Boring Head



Anorak Bob
6th Feb 2012, 06:25 PM
Quality item made in the USA. In good condition. Has a 3 Morse taper arbor. Someone has removed the tang and cut a draw bar thread.

I'm chasing $90 ( what it cost me including shipping from the US ) plus postal charges. I am trying to sell it because it is too big for my piddly machines.

It will weigh just under 5 kg when packaged up.

Photos in these links

http://www.woodworkforums.com/f65/too-big-130210/index2.html

http://www.woodworkforums.com/f65/boring-head-dissection-130750/

BT

Old Fraggle
12th Feb 2012, 08:02 PM
Hi Bob, is it possible to change the arbor
Cheers..Don

Anorak Bob
12th Feb 2012, 10:16 PM
Hello Don,

The arbor will unscrew. All Flynn heads have removable arbors. I haven't tried to remove it. I have a CC Craley head that had a 2 Morse arbor. I bought a NMTB 30 arbor from CTC Tools in Hong Kong and turned down and threaded that arbor to suit the internal thread of the Craley. Works well.

http://www.woodworkforums.com/f65/squandering-clearance-143895/

BT

Old Fraggle
13th Feb 2012, 08:46 AM
Hi Bob, thanks for your reply.
I'd like to buy it off you.
My email is
[email protected]

Cheers...Don

Log
27th Feb 2012, 09:43 PM
Hi Bob
Have PM'd you.

Cheers

If I'm not right, then I'm wrong, I'll just go bend some more bananas.

Anorak Bob
27th Feb 2012, 10:35 PM
I should have posted SOLD to Don. Hopefully he's happy with it.

BT