Rebus
2nd Jan 2005, 10:38 AM
Greetings,
I was waiting for someone else to start the ball rolling but everyone must be on holidays.
I recently bought a 12" x 36" Herless lathe and have been practising by making up a master/slave chuck system and a tapping/threading guide for mounting on the tailstock.
While working on these things I have hit the usual problem of lost time and effort in changing from one tool to another. The answer is, of course, a quick change toolpost. Checking the Herless catalogue, I can have my very own for a mere $495.00 :eek: and that's with only 3 + 1 holders. :mad:
So, off to Google and search out plans for DIY quick change toolposts. A couple of hours later and a number of fundamental questions appear:
The Wedge: Is it best to have the Tail on the toolpost and the Pins on the toolholder, or vice versa, or doesn't matter ?
Locking Mechanism: I have seen examples where the toolholder is locked by:
A cam forcing out a pin which presses against a plate which in turn pushes the toolholder away from the body thereby locking the wedge. (refered to as a piston style)
Examples:
http://home.inter.net/mthomas/quick_change_tool_post.htm
http://homepage.ntlworld.com/v.ford/qctp.htm
A pin with a wedge shaped end which pulls one side of the toolholder against the toolpost.
Example:
http://www.metalwebnews.com/howto/toolpost/toolpost.html
A toolpost which has been split and is pulled closed to lock the toolholder.
Example:
http://homepage.ntlworld.com/v.ford/gtmake.htm
So, what is the best way ? Your thoughts/experiences are welcome.
Regards,
I was waiting for someone else to start the ball rolling but everyone must be on holidays.
I recently bought a 12" x 36" Herless lathe and have been practising by making up a master/slave chuck system and a tapping/threading guide for mounting on the tailstock.
While working on these things I have hit the usual problem of lost time and effort in changing from one tool to another. The answer is, of course, a quick change toolpost. Checking the Herless catalogue, I can have my very own for a mere $495.00 :eek: and that's with only 3 + 1 holders. :mad:
So, off to Google and search out plans for DIY quick change toolposts. A couple of hours later and a number of fundamental questions appear:
The Wedge: Is it best to have the Tail on the toolpost and the Pins on the toolholder, or vice versa, or doesn't matter ?
Locking Mechanism: I have seen examples where the toolholder is locked by:
A cam forcing out a pin which presses against a plate which in turn pushes the toolholder away from the body thereby locking the wedge. (refered to as a piston style)
Examples:
http://home.inter.net/mthomas/quick_change_tool_post.htm
http://homepage.ntlworld.com/v.ford/qctp.htm
A pin with a wedge shaped end which pulls one side of the toolholder against the toolpost.
Example:
http://www.metalwebnews.com/howto/toolpost/toolpost.html
A toolpost which has been split and is pulled closed to lock the toolholder.
Example:
http://homepage.ntlworld.com/v.ford/gtmake.htm
So, what is the best way ? Your thoughts/experiences are welcome.
Regards,