PDA

View Full Version : SOLD: - Lathe and full tools kit



Roulston
28th Apr 2011, 03:13 PM
I am considering that I have to sell my lathe. Well lathe and about $2000 worth of tools, holders, mill attachments etc.

http://www.pbase.com/image/134268660.jpg

This is a standard CQ6230A lathe in very good hardly used condition. Is very well aligned, straight and true, meticulously maintained, about 100 hours total run time.

Pick up of course from Canberra.

I need $3500, but will take offers, reasonable ones.

anyone interested can email me at [email protected]

Thanks for looking.

M/LATHE 36"-CHI W/LIGHT &GUARD

Categories - Toolex Category 1 - TOOLEX METAL LATHES - M/LATHE 36"-CHI W/LIGHT &GUARD

Code 580713
Description M/LATHE 36"-CHI W/LIGHT &GUARD



Specifications *Swing over bed 300mm. *Swing over gap 430mm max. *Distance between centre 915mm max. *Hole through spindle 38mm. *Tailstock spindle travel 100mm. *Tool slide travel 76mm. *Taper of spindle bore MT5. *Spindle nose D1-4. *240v 50hz 2hp motor. *lead screw 8 threads per inch. *Dimensions 560mm H x 520mm D x 1540mmL. *Swing over cross slide 178mm max. *Width of gap 203mm. *Width of bed 180mm. *Cross slide travel 130mm. *Saddle travel 760mm. *Taper of tailstock MT3. *Range of spindle speeds 65-1810 rpm. *Weight nw/gw 400kg/480kg. *Threads can be cut 32 inch sizes 4-60tpi 32 metric sizes 0.4-7mm. *Included standard accessories: *6" backplate for three jaw chuck. *8" backplate for four jaw chuck. *Centre sleeve (MT5,MT3). *Centre (MT3) x 2. *Tool box. *Steady rest. *Gear change set. *Tool kit. *Instruction book. *6" 3 jaw scroll chcuk & reverse jaws. *8" 4 jaw independant chuck. *Drive plate. *Camlock & chuck keys. *Tool post wrench. *Oil can. *Follow steady. *Chip tray with splash guard. *Thread cutting / gear selection chart. *Fully enclosed oil bath, gear box and saddle allowing quick changes of feed speed ratios with 18 spindle speeds from 65 to 85 rpm. *D1-4 cam lock type chuck fitting - ISO standard. *150mm (6") centre height up to 430mm swing over bed. *Worklight included standard with inbuilt transformer 240/24volt. *Change gears supplied for metric or imperial thread cutting. *Standard accessories also include fixed travel steady, metal splash guard & tray. *Hardened & precision ground 'v' bed with 230mm removable gap. *Dual calibration on tailstock spindle, cross-slide & toolpost travel - imperial only on saddle.

Roulston
10th May 2011, 07:35 PM
Sold.



I am considering that I have to sell my lathe. Well lathe and about $2000 worth of tools, holders, mill attachments etc.

http://www.pbase.com/image/134268660.jpg

This is a standard CQ6230A lathe in very good hardly used condition. Is very well aligned, straight and true, meticulously maintained, about 100 hours total run time.

Pick up of course from Canberra.

I need $3500, but will take offers, reasonable ones.

anyone interested can email me at [email protected]

Thanks for looking.

M/LATHE 36"-CHI W/LIGHT &GUARD

Categories - Toolex Category 1 - TOOLEX METAL LATHES - M/LATHE 36"-CHI W/LIGHT &GUARD

Code 580713
Description M/LATHE 36"-CHI W/LIGHT &GUARD



Specifications *Swing over bed 300mm. *Swing over gap 430mm max. *Distance between centre 915mm max. *Hole through spindle 38mm. *Tailstock spindle travel 100mm. *Tool slide travel 76mm. *Taper of spindle bore MT5. *Spindle nose D1-4. *240v 50hz 2hp motor. *lead screw 8 threads per inch. *Dimensions 560mm H x 520mm D x 1540mmL. *Swing over cross slide 178mm max. *Width of gap 203mm. *Width of bed 180mm. *Cross slide travel 130mm. *Saddle travel 760mm. *Taper of tailstock MT3. *Range of spindle speeds 65-1810 rpm. *Weight nw/gw 400kg/480kg. *Threads can be cut 32 inch sizes 4-60tpi 32 metric sizes 0.4-7mm. *Included standard accessories: *6" backplate for three jaw chuck. *8" backplate for four jaw chuck. *Centre sleeve (MT5,MT3). *Centre (MT3) x 2. *Tool box. *Steady rest. *Gear change set. *Tool kit. *Instruction book. *6" 3 jaw scroll chcuk & reverse jaws. *8" 4 jaw independant chuck. *Drive plate. *Camlock & chuck keys. *Tool post wrench. *Oil can. *Follow steady. *Chip tray with splash guard. *Thread cutting / gear selection chart. *Fully enclosed oil bath, gear box and saddle allowing quick changes of feed speed ratios with 18 spindle speeds from 65 to 85 rpm. *D1-4 cam lock type chuck fitting - ISO standard. *150mm (6") centre height up to 430mm swing over bed. *Worklight included standard with inbuilt transformer 240/24volt. *Change gears supplied for metric or imperial thread cutting. *Standard accessories also include fixed travel steady, metal splash guard & tray. *Hardened & precision ground 'v' bed with 230mm removable gap. *Dual calibration on tailstock spindle, cross-slide & toolpost travel - imperial only on saddle.