SurfinNev
20th Mar 2011, 09:10 PM
I have a C2 Variable Speed Lathe originally purchased from Minitech, but never used. It is still partially disassembled as it was stripped down to clean, lubricate and do adjustments. There is also some slight mods to handwheel handles to be completed and the tailstock, saddle, leadscrew and covers to be reassembled. The motor has been reinstalled and the headstock stripped, cleaned and lubricated. I now have a bigger lathe to work on and have no time to finish this one.
Here's a link to the lathe type.
http://wic043u.server-secure.com/vs4487_secure/dept.asp?id=154
This will be a pickup only sale as I need whoever purchases it to be reasonably close, so I can possibly assist with the reassembly and also make sure all parts are found for it.
Nev
Edit: Rules state that I must include a price so $550.00 would be nice.
Here's a link to the lathe type.
http://wic043u.server-secure.com/vs4487_secure/dept.asp?id=154
This will be a pickup only sale as I need whoever purchases it to be reasonably close, so I can possibly assist with the reassembly and also make sure all parts are found for it.
Nev
Edit: Rules state that I must include a price so $550.00 would be nice.