eddahenry
3rd Nov 2010, 11:31 PM
Quick Change Tool Posts & Holders 6-12" 100 AXA
$150 OBO so offer away
PAYPAL PREFFERED
Hi Guys
I have upGraded to 40 position tool post so my old piston type is for sale
is one of the chiniese copies
works fine
a few light scraches but nothing serious
i have modded the T nut to suit my lathe but you could always make a new one or if your lathe has a 9/16 or 14mm tool post bolt this may slide straight on
will come with all 5 tool holders post and modded tnut
no turning tools but i will leave the HSS cutoff blade in the cutoff tool holder
here is a pic on my lathe
http://i94.photobucket.com/albums/l91/eddahenry/DSCF1497.jpg
2nd hand
piston type
100 AXA series
6-12" swing
here is a picture of a new one you will get all of these tool holders plus a HSS cutoff blade to suite
http://i94.photobucket.com/albums/l91/eddahenry/pistontoolpost.jpg
Dimensions
http://i94.photobucket.com/albums/l91/eddahenry/2403.jpg
A=2-1/2" B=3-7/8" C=2-1/4" D=9/16" E=1-3/8" H=4-11/16" R=5-3/4"
$150 OBO so offer away
PAYPAL PREFFERED
Hi Guys
I have upGraded to 40 position tool post so my old piston type is for sale
is one of the chiniese copies
works fine
a few light scraches but nothing serious
i have modded the T nut to suit my lathe but you could always make a new one or if your lathe has a 9/16 or 14mm tool post bolt this may slide straight on
will come with all 5 tool holders post and modded tnut
no turning tools but i will leave the HSS cutoff blade in the cutoff tool holder
here is a pic on my lathe
http://i94.photobucket.com/albums/l91/eddahenry/DSCF1497.jpg
2nd hand
piston type
100 AXA series
6-12" swing
here is a picture of a new one you will get all of these tool holders plus a HSS cutoff blade to suite
http://i94.photobucket.com/albums/l91/eddahenry/pistontoolpost.jpg
Dimensions
http://i94.photobucket.com/albums/l91/eddahenry/2403.jpg
A=2-1/2" B=3-7/8" C=2-1/4" D=9/16" E=1-3/8" H=4-11/16" R=5-3/4"