Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 3 of 3
  1. #1
    Join Date
    Apr 2014
    Location
    Melbourne
    Posts
    24

    Default small sand mulling machine

    Does anyone know where I can get a small (cheap) sand muller for the occasional casting I do, I built a Vontorn sand muller but it didn't work too well (probably my poor build) so I chucked it out and just don't feel up to making another muller, I'd rather buy something if it's small and reasonably priced.
    thanks

    Eric

  2. #2
    Join Date
    Nov 2004
    Location
    Port Pirie SA
    Age
    47
    Posts
    820

    Default

    Dont see many of them getting around, most would be industrially sized and not cheap even 3rd hand
    ....................................................................

  3. #3
    Join Date
    Jul 2016
    Location
    Melbourne
    Age
    30
    Posts
    806

    Default

    I think unfortunately it's going to a case of build one or do it by hand. What was the failing in your last one? Lots of things require persistence to get a result.

Similar Threads

  1. Small Milling Machine vice needed
    By ml018 in forum WANTED TO BUY
    Replies: 8
    Last Post: 6th Dec 2018, 10:12 PM
  2. Small UNC/UNF machine screws
    By Ueee in forum METALWORK GENERAL
    Replies: 10
    Last Post: 13th Nov 2013, 09:15 PM
  3. buying small Milling machine
    By jackaroo in forum METALWORK GENERAL
    Replies: 60
    Last Post: 27th Nov 2011, 09:50 AM
  4. is the sand from a sand blaster carcinogenic???
    By new_guy90 in forum METALWORK GENERAL
    Replies: 12
    Last Post: 24th Nov 2010, 10:09 PM
  5. Small machine shop job
    By Legion in forum METALWORK GENERAL
    Replies: 3
    Last Post: 1st Feb 2010, 06:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •