Results 1 to 2 of 2
  1. #1
    Join Date
    Mar 2012
    Location
    Mission Beach, QLD
    Posts
    34

    Default MDT TAC21 Chassis for Rem 700 Police MLR .338 Lapua Magnum?

    Hi all,

    Just wondering if anyone has a MDT TAC21 Chassis system for their rifle/s and if so, do you recommend them? I am trying to decide between one of these or an AICS L115A3 Tactical Chassis system. It's mainly for LR target comps and occasional camel, goat, pig, etc hunting.

    Thanks for the info.

  2. #2
    Join Date
    Apr 2008
    Location
    NSW
    Posts
    542

    Default

    Not sure which AICS you are referring too as there is many models . However steer clear of any alloy chassis that has a joint of any kind between the forend stock or tube and the main action support . You want one unbroken unjoined piece of metal from the bipod connection to behind the rear action screw like the AICS 2 . The older AI's are better than the new ones as far as rigidity goes . KRG Whiskey 3 chassis performs well but I am not so sure it's one piece from bipod to rear action screw . I have never owned any of them I build my own and I learned one thing it's all about rigidity especially when you get up around the 338 LM . Light weight means flimsy and flexible = lost accuracy . The Military does not actually need super accuracy but they do need portability so most Chassis used by them are on the lightweight side well lighter than they could be to wring out that last bit of accuracy mainly from reduced recoil and reduced flex . Well designed muzzle brakes area good idea as they tend to keep the muzzle down under recoil and reduce side to side bi-pod skate . The one made in NZ is good but I have forgotten the name right now.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •