Search:

Depends on how far the power lead is run to Marc,
I have had problem before with volt drop not powering the magnetic


Sent from my iPhone using Tapatalk

I was going to pre weld entire frame before putting up, might even consider getting it powder coated

About to build floating type shelving in my garage on sides, on the upper level of wall only so my car doors can open below.

shelves to be about 400mm deep.

thinking 50x25RHS bolted to brick...

was that gate to gate or just the interstate transport

i know on good info that there was auction online in sydney few months back where the main lot sold for 125k, it went from under 10K about an hour before ending all the way up for hours.

the...

tig dont have one.

brazing is option is this hard to get a decent joint with some strength

need to make up access panel frames for a job.

outside frame will be 20x3mm flat bar

inside frame will be 20x20x3mm angle

can we use a differnt wire and mig it togther.

welds will not...

Is 100% Aragon ok to weld mild steel with or do you need a mix?

very nice stair stuff,

we have done a few big ones we act as subcontractor do all timber / glass in house suby out steel.

if you do sell on ebay post the link cause i might have a crack at...

are you going to sell your old tray?

what of work do you guys do?

are you selling your old tray?

what kind of work do you guys do?

why dont you use 4mm alumium compsite panel thats pre finshed in black.
BUT it will scratch easy.

he actual developed the sprial head, other guys brought one off him and copy it and now importing them,

i would not waste the money on trying to get one made from some one who has not made them...

100% buy imported,

crown tooling also sold there 5 axis cnc a few months back.

price imported is no where near aus price

give him a call he may still have a few in stock, Crown tooling st...

try paint section on floor in box, thats were i found them last.

the big flashy cemset guns are given out when you buy a box, i actual had to bolt mine back togther last week as some nuts had...

yea the ramset goes in big gun, thats only for ramset hilti has there own gun too, not sure about the cost iof the guns but you will extra nozzels which are 5 bucks each.

the big caulking guns...

have not had a chance to do anything on it yet.

i have a few auto paint factors near work so ill see what i can dig up.

i actual want to do full body resto and spray on outside of the box as...

na thread rod is upstairs where the power tools are, its out the back they have massive range of machine bolts and nuts etc.

never actual brought chemset from them i think they sell powers and...

its upstairs in the industrial section, kind of pot luck with there prices but thats whats it worth.

make sure you get a packet of spare nozzles, plus the air blower to clean holes out.

covertry fastners they are at a few places but i know alexndria & artarmon,
Austin stainless at Alburn
masbolt at easterncreek
few other stainless shops on nth beachs as well has hardware &...

for inside a tool box!!!

need DIY alternative

whats this chicken poo paint is that rubber based?

yes thats the stuff but i dont want to pay 300 bucks any other ideas

any one know where i can get that ute liner paint, i wnat to use it to paint some tool boxes on the inside and i am going to powedercoat the outside after i have done some body work as they are...

companys that make roof flashings have nice benders and stock gal sheet stock in differnt thickeness that are used to make box gutters, they can do it easy as, i would not call a big company like BHP...

i know a guy that has a full machine shop he does a lot of work making custom pump parts,

he can machine any type of steel.

you will need to provide detailed dimension drawings that he can...

went to supercheap today but they were not actual reduced, any one know where they are some on sale?

wow the last few years went quick,

have a nice new year with the pay rise

contractor talk has a "thanks"

there a few other buildings use the sea water as heat excahnge system for AC like the oprea house

might see how much its worth from the company that does our forklift gas,

brought this beast today at auction,

its 3ph, which suits me fine.

never mig before just need to work out setup for gas ration & feed rate,

whats best option for getting gas bottle with...

i think my PC got a spamed or wat ever its called off a forum (not a ubaeat one) its been running slow since and its only new. dam POS

na still no go for me

i keep getting this message both on my PC & my iphone

Fatal error: Class 'vB_Exception_AccessDenied' not found in /home/renovate/public_html/packages/vbcms/controller/content.php on line 108

thats a very nice job so much better than the crap you see at harvey norman,

did you make the crane, if so you are bloody champion

you could just buy the section's from a manufacter and make your own windows, dont forget to allow for cost of blade around 100bucks,

might be cheaper to ring around small window companys to get...

edcon steel a kings park, will sell you any size you need plus have off cuts that are cheap.

cheers mick,

might get a sheet of 12mm ply and a couple of 3mm, then glue them up making it step up in the center to 18mm, plan off the edges,

wrap with glass, few coats on top and one on the...

thanks Yonnee

any ideas which site had the plywood top, sounds easy and cheapish,

my tarp is stuffed on my ute, looked at getting ute lid / hard top but $1500+ is a bit steep.

fibreglass?

alu ?

Bit of a road trip between bayswater and syd

Nice work, how do you adjust base to cut angles or are you going to use a spacer against the fence.

There is a guy called brass and glass at brookvale he does brass fab work so I am sure he may have an off cut

i think that the saw stand will be no good as the cut off saw has a lot of vibration when cutting,

you need a nice solid base for the cut off saw,

plus when doing 45deg, you need to move the...

very very nice,

nice job & nice crane

dont know why but the reno forum works with out issue on iphone, this site sucks bad on the iphone

give a roofing suppiler a call like KFC or ridgeway they buy colourbond in the roll for use as flashings.

they could supply you your cladding in single lengths to save waste and it may be...

its composite cladding.

used for facides, bit exy for a trailer.

try fairview architectural they delivery to sydney everyday and the price is good, they have a few colours and sheet sizes,
...