5 Attachment(s)
Old Richardson Bench Drill Press (probably 1930s), 13mm chuck, Single phase. $300
For sale is a single phase Richardson drill press $300.
*It has a 13mm keyed Jacobs US chuck with a key.
*Original Crompton Parkinson Motor.
*Original ball ends on handles (handles are stainless steel).
*6 speed V belt pulley (a bit cracked but does not affect the performace.
*Non returning spindle (allows the spindle to remain in the same position.
*Table is adjustable to -45 to 45 degrees.
*Has the original motor starter which uses fuse wire. Can be replaced with a modern switch if it plays up.
Dimensions 105cm tall, 70x30cm wide. Weights about 150 KG.
Pickup Campbelltown Area, Sydney.
Attachment 374108Attachment 374109Attachment 374110Attachment 374111Attachment 374112