Printable View
G'Day All,
Please allow me to introduce myself.
I'm Don & live in Lismore NSW. I have very recently found this forum & looking forward to participating on it.
I am a retired fitter & turner & I am currently working on a 1.5" scale Aveling road roller that is I.C. engine powered. More on this when I start a thread on the roller's build.
Thanks for accepting me into this forum.
Regards,
Don.
Welcome to the forum Don.
Welcome Don,
It's a good group of guys here so feel welcome, there's plenty of support.
I'm at the Gold Coast.
Thanks for the welcome, hope that I can contribute something to the forum.
Regards,
Don.
Welcome and remember rule #1, Pictures or it never happened. :D
Welcome to the forum Don, great introduction.
An IC Aveling, I suppoooose I'll still look at the thread.:D:D:D
As .RC. said, "pictures or it never happened"
You have picked a great forum and I look forward to your work.
Phil
Welcome Don.
I am looking forward to seeing the build. I have to make a road roller myself sometime. I need to get my drive built up a bit as well as some of the tracks, gateways etc around the place. The drive leading up to my carport has been under about 100mm of water for a distance of about 10m most of winter. This is a circular drive. The main drive is about 150m long.
My build will be along the lines of a frame to mount a 1000 litre container on, with a row of 4WD wheels underneath. :D I need to work out how many wheels to use.
Dean
Hi Don,
Welcome to the Metalwork Forums
Grahame
Hi.
If you get up to Brisbane you should come out to Petrie Town and have a look at our Aveling.
https://scontent-syd2-1.xx.fbcdn.net...a6&oe=5A40FF00