Hi Ash I junked a lathe for work and got to keep all of the gears off it so hopefully there will be one in it (Hare and Forbes and exactly like yours) will drag it out tonight for a squiz
Bruce
Printable View
Hi Ash I junked a lathe for work and got to keep all of the gears off it so hopefully there will be one in it (Hare and Forbes and exactly like yours) will drag it out tonight for a squiz
Bruce
Geez Bruce, you've got me very excited. I'll keep everything crossed that you have the one.
Thanks heaps
Ash
Good morning Bruce
The suspense is killing me............. Did you have a chance to look through your gears ?
Just scaling off the photos, it looks to me like Ash needs a 22 tooth gear - same as the one already there.
Hi guys
Yep found the box of gears now just got to work out how to post a pick
Try this one its a bigger pic
https://drive.google.com/file/d/0B5s...ew?usp=sharing
Bruce
I think of the gears in that photo, the one you want is the mid bottom one with a thin bronze bush and no key.
Thanks Bruce
Not sure where to go from here. Perhaps I need to take some measurements of the current gears and see if that helps?
I'm happy to pay for postage of the one Caskwarrior suggests and see if it fits?
Any thoughts are greatly appreciated. Attached pic shows missing gear.
AshAttachment 371639
You could find out which format the gears Are, i would guess they are probably Module gears being made in a metric country, you probably need to do some reading about measuring gears to be 100 percent sure or just compare the real gears.
Ash, if you measure the OD of the gear and count the teeth, that will give a good idea of whether the gear matches what you have. Then it is a matter of whether it is the same thickness and bore.
Michael
PM me your address and i will pop a couple in the post
Bruce
Hi Bruce
Couldn’t work out how to PM on my phone. *******************. Very happy to pay COD.
Thanks heaps, I am very grateful.
Ash Menzies.
Hi there Ash
Got your details please edit your post to remove your address details mate
Bruce
Hi Bruce
I can't seem to edit. May be too old to change.
Admin - can you please help?
Thanks
Ash