Hi Dan,
That's a very nice grinder. I see you can operate it from both sides. The left side ( for the viewers) was standard. The right side controls were an option. And if I am right, you also have the micro adjustable stop dogs? Nice!
You do realise the front to back movement of the table uses the same rollers as the left to right?
(I think it would be the X and Z axis, but I get confused about how to name the axis)
That's what makes it possible to use the copy grinding attachment and differs between the U1 and the U2 grinder (yours). By the way, when I inquired about the rollers this is what I was told:
Roller 10*14, SKF partnr. RC-10x14-c, package of 100, €99,68.
Roller 12*12, SKF partnr. RC-12x12-c, package of 100, €159,77.
I see your copying attachment has a roller on the front? Mine is just a solid piece. Would it be possible to show some detail pictures of the "finger" and what I presume is the holder for templates?
You have a nice way of storing all the different accessories for the grinder. All the parts together in a box, never looking for the parts you need to use it.
Are all accessories complete? I am missing the drive wheel for the vertical grinding head and would really appreciate some pictures and dimensions so I can make one.
Also what size wheels do you have with the internal grinding attachment? I don't have all of these either.
By the way, what is the large part in the box between the internal grinding attachment and the clearance angle setting dog?
If you need info for parts you are missing and want to make, I have all kinds of parts, so I might be able to help.
Peter