Needs Pictures: 0
Results 16 to 18 of 18
Thread: Waldown 8SN what is missing?
-
31st Oct 2018, 08:51 PM #16Golden Member
- Join Date
- Jul 2011
- Location
- Adelaide
- Posts
- 837
-
1st Nov 2018, 09:05 AM #17Most Valued Member
- Join Date
- Jul 2006
- Location
- Athelstone, SA 5076
- Posts
- 4,255
-
27th Dec 2018, 09:15 PM #18Golden Member
- Join Date
- Jul 2011
- Location
- Adelaide
- Posts
- 837
After calling Brobo I discovered the intermediate pulley and the motor pulley are no longer available for the 8SN but that they are available for the 3M. The only difference is that the motor pulley bore is 19mm rather than 5/8" and the intermediate pulley block does not have a groove machined in it to let the motor mount bars of the 8SN slide past it. However early 2M and 3M intermediate pulley blocks do have this feature so the part could fit both the 8SN and 2M/3M. I have moved these parts from my recently acquired 3M to the 8SN thus allowing its completion. In the new year I will order new parts that will work on my 3M from Brobo.
Similar Threads
-
Missing 3 jaw chuck
By newmanwoodlands in forum METALWORK GENERALReplies: 6Last Post: 28th Jun 2017, 04:30 PM -
missing posts?
By jhovel in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 3Last Post: 16th Jan 2012, 06:37 PM -
Missing threads?
By John G in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 1Last Post: 27th Jan 2011, 07:31 PM -
Something Missing
By wheelinround in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 6Last Post: 4th Nov 2008, 07:44 AM