Thanks: 0
Needs Pictures: 0
Results 1 to 3 of 3
-
6th Oct 2018, 11:16 AM #1.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 6,458
Another Saw Arbor - This Time From Switzerland
I had posted and just now removed these photos in Simon's Pacific mill rebuild thread in response to his comment in this post - //metalworkforums.com/f303/t200...87#post1937387
I had ventured out to Fiora Machinery yesterday in pursuit of a modular vice. There was a two piece Vertex vice but nothing modular. What I did find in a display case was the arbor below. It looked familiar with its finish and stamped sizing. I purchased my 13 from the Fiora brothers in 2010 and included in the purchase was a crate of accessories. One of those accessories was what looked like an unused long 1" cutter arbor with its full compliment of spacing collars.
The short arbor was probably removed from the crate prior to my purchase. Other than the slight corrosion it shows no evidence of use. Schaublin provided a wide size range of these arbors in both metric and imperial sizes.
The 13 cannot accommodate a 6" saw on the long arbor, the overarms get in the way. With this arbor and its keyed drive I have a few more options. Another handy acquisition.
IMG_20181005_144928740 (Large).jpg IMG_20181005_144945568 (Large).jpg IMG_20181005_145848019 (Large).jpg IMG_20181005_150348325 (Large).jpg
BT
-
7th Oct 2018, 09:25 AM #2Most Valued Member
- Join Date
- Aug 2011
- Location
- Melbourne
- Posts
- 4,779
Nice work Bob!
You had me confused for a little while, my tapatalk thingy showed a reply from you in my rebirth of the Pacific FT2 but when I went to look at the reply on the PC it was non-existent. Messing with my head Bob!
Anyway, another nice piece to add to your collection.
Cheers,
SimonGirl, I don't wanna know about your mild-mannered alter ego or anything like that." I mean, you tell me you're, uh, super-mega-ultra-lightning babe? That's all right with me. I'm good. I'm good.
-
7th Oct 2018, 09:42 AM #3.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 6,458
Similar Threads
-
More from Switzerland - an Erlach Drill chuck
By Anorak Bob in forum METALWORK GENERALReplies: 8Last Post: 22nd Jul 2018, 10:13 AM -
Wanted: R8 to B16 arbor or decent R8 drill chuck and arbor
By caskwarrior in forum WANTED TO BUYReplies: 0Last Post: 4th Aug 2016, 05:42 PM -
More from Switzerland - A Reglus Clinometer
By Anorak Bob in forum METALWORK GENERALReplies: 7Last Post: 24th May 2015, 04:52 PM -
More from Switzerland - Watches and Machines
By Anorak Bob in forum METALWORK GENERALReplies: 11Last Post: 17th May 2012, 12:33 AM -
More from Switzerland - A Strama Grinder
By Anorak Bob in forum METALWORK GENERALReplies: 2Last Post: 31st Jul 2011, 02:42 PM