Needs Pictures: 0
Results 16 to 21 of 21
Thread: Spring loaded centre finder
-
25th Aug 2018, 08:37 PM #16
Good Morning Bob, Guys,
Very nice finish on that spring centre ! I like the coarse effect of the bluing process. I bet it improves the fit of the parts and smoothness of movement. I'm tempted to send mine over for bluingBest Regards:
Baron J.
-
26th Aug 2018, 12:47 AM #17Member: Blue and white apron brigade
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 7,182
-
2nd Sep 2018, 03:48 AM #18
Hi Bob, Guys,
Attachment 374848
And not least a family picture of all the bits except the cap that screws into the end to stop the spring popping out.
I will post further when I make the cap that goes in the end.
Hi Guys,
As promised the final pictures of the cap that goes in the end to keep it all together.
01-09-2018-004.jpg 01-09-2018-003.jpg 01-09-2018-002.jpg 01-09-2018-001.jpgBest Regards:
Baron J.
-
2nd Sep 2018, 10:16 AM #19Most Valued Member
- Join Date
- Nov 2007
- Location
- melbourne australia
- Posts
- 3,228
Copycat!
Chris
-
2nd Sep 2018, 09:53 PM #20
Hi Chris, Bob, Guys,
Chris, I don't see your brass cap
Anyway blame Kryn for reminding me that I had an unfinished project
Thanks all.Best Regards:
Baron J.
-
2nd Sep 2018, 10:47 PM #21Most Valued Member
- Join Date
- May 2011
- Location
- Murray Bridge S Aust.
- Age
- 71
- Posts
- 5,942
What did I do??????
KrynTo grow old is mandatory, growing up is optional.
Similar Threads
-
Chasing a suitable spring or spring material for a microscope eyepiece clamp.
By Anorak Bob in forum METALWORK GENERALReplies: 35Last Post: 28th Jul 2016, 02:00 AM -
Sharpening Spring Loaded Centre Punch
By Fuzzie in forum METALWORK GENERALReplies: 7Last Post: 29th Nov 2015, 04:06 PM -
A very interesting, totally new, DIY electronic EDGE FINDER
By cba_melbourne in forum METALWORK GENERALReplies: 4Last Post: 9th Nov 2013, 11:27 AM -
Edge finder . which is best?
By morrisman in forum METALWORK GENERALReplies: 11Last Post: 21st Feb 2012, 09:02 AM -
spring loaded oilers
By Stustoys in forum METALWORK GENERALReplies: 32Last Post: 29th Jan 2011, 07:41 PM