Results 61 to 63 of 63
-
18th Aug 2018, 10:49 PM #61Most Valued Member
- Join Date
- Nov 2007
- Location
- melbourne australia
- Posts
- 3,228
Mat,
Seems this guy has the same problem you. Might give you some ideas for regrinding the taper:
https://www.youtube.com/watch?v=9Xmk...&frags=pl%2CwnChris
-
20th Aug 2018, 09:45 PM #62Novice
- Join Date
- Aug 2018
- Location
- Tasmania
- Age
- 48
- Posts
- 19
It's now solved. I ended up matching the taper of a collet block I had with the compound in my lathe, and remachining the taper on each chuck. The finish isn't too bad, but more importantly now I have much better runout spec. It's matching my measured spindle runout of 0.03mm.
Mat
-
21st Aug 2018, 12:31 AM #63Most Valued Member
- Join Date
- May 2011
- Location
- Murray Bridge S Aust.
- Age
- 71
- Posts
- 5,959
Glad to hear that you've got it sorted out.
KrynTo grow old is mandatory, growing up is optional.
Similar Threads
-
Preventing collet slip & tool holder torque
By steran50 in forum METALWORK GENERALReplies: 15Last Post: 8th May 2013, 02:57 PM -
Slitting Saw Runout
By jack620 in forum METALWORK GENERALReplies: 37Last Post: 23rd Mar 2013, 09:00 AM -
How To Avoid Cross Threading Bolts and Screws
By mike48 in forum METALWORK GENERALReplies: 9Last Post: 6th Dec 2012, 11:45 AM -
runout test
By morrisman in forum METALWORK GENERALReplies: 20Last Post: 15th Oct 2011, 09:28 PM -
TOS Chuck Runout
By Anorak Bob in forum METALWORK GENERALReplies: 17Last Post: 7th Mar 2011, 03:01 PM