Needs Pictures: 0
Results 1 to 3 of 3
-
16th Jul 2018, 02:13 PM #1.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 6,458
A Simple Enhancement for a Screwed Spindle Nose Protector/Ejector
Could not be more simple, a washer.
Greg had posted a thread in the Projects area about printing a nose protector for his Hercus 260 - //metalworkforums.com/f303/t201...22#post1935822 and I had said that I'd make a spacer for my protector/ejector to facilitate the removal of a collet chuck I like using. The ejector's intended role was to remove the 3C adaptor that Hercus offered for 9" lathe and protect the nose threads.
IMG_20180716_102459822 (Large).jpg
I had thought of using a forked plastic glazing block but it would have entailed milling the slot in the fork a few millimetres wider to slip around the exposed end of the ER25 chuck's 2 Morse arbor. Then I thought about making a slot in a piece of aluminium flat bar but then I found a washer.....
IMG_20180716_101838761 (Large).jpg IMG_20180716_101851493 (Large).jpg IMG_20180716_101903783_BURST000_COVER_TOP (Large).jpg IMG_20180716_101952595 (Large).jpg IMG_20180716_102051604 (Large).jpg
Thanks for the motivation Greg.
BT
-
16th Jul 2018, 04:20 PM #2Most Valued Member
- Join Date
- Apr 2012
- Location
- Healesville
- Posts
- 2,129
no bashing
I love it, good one Bob
-
16th Jul 2018, 05:20 PM #3.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 6,458
Similar Threads
-
Printed Spindle nose cover
By kwijibo99 in forum METALWORK PROJECTSReplies: 9Last Post: 18th Jul 2018, 03:19 PM -
260 Spindle Nose
By cba_melbourne in forum THE HERCUS AREAReplies: 1Last Post: 8th Oct 2014, 06:38 PM -
Model ARM Spindle nose Thread Damage
By mistrem in forum THE HERCUS AREAReplies: 4Last Post: 6th Apr 2014, 11:34 PM -
Info from USA on spindle nose register
By nadroj in forum THE HERCUS AREAReplies: 5Last Post: 17th Aug 2012, 09:11 AM -
ER Collet Chuck Spindle Nose Blanks.
By pipeclay in forum THE HERCUS AREAReplies: 50Last Post: 6th Jul 2011, 12:24 AM