Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: New tank for plasma
-
2nd Jan 2016, 07:41 PM #1Senior Member
- Join Date
- Apr 2013
- Location
- Bunbury WA
- Posts
- 98
New tank for plasma
I just scored a compressor with a 24 litre tank, the aim is to rig the tank up so it takes air from the 40 litre tank and hopefully drops out any moisture prior to plasma cutting. I was thinking of just running a line from outlet to inlet then i thought positioning the secondary tank higher might be better. Anyone know anything about this?
input appreciated.
-
4th Jan 2016, 04:41 AM #2
Hi Clive,
Water will always migrate down to the lowest point if it can. Just make sure that you can drain both tanks at the bottom. Chilling the hot air will also force moisture out as well. An old fridge could come in usefulBest Regards:
Baron J.
Similar Threads
-
Etchant Tank.
By DSEL74 in forum METALWORK GENERALReplies: 13Last Post: 5th Dec 2015, 11:09 PM -
Petrol tank
By gooddroprob in forum METALWORK GENERALReplies: 19Last Post: 3rd Oct 2014, 09:23 AM -
Coollant Tank
By BobL in forum METALWORK GENERALReplies: 22Last Post: 26th Mar 2012, 04:04 PM -
brazing fuel tank?
By Mathuranatha in forum WELDINGReplies: 36Last Post: 26th Apr 2009, 12:14 PM -
adding a coolant tank
By Dusty Wheels in forum METALWORK GENERALReplies: 21Last Post: 24th Jun 2007, 01:24 PM